Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
LILYGO® T-TWR REV2.1 ESP32-S3 Walkie-Talkie Development Board L76K GNSS Module With 1.3 inch OLED PMU AXP2102 Battery Holder GPS — image 1
Hover to zoom

1 / 8 · Click to enlarge

LILYGO

LILYGO® T-TWR REV2.1 ESP32-S3 Walkie-Talkie Development Board L76K GNSS Module With 1.3 inch OLED PMU AXP2102 Battery Holder GPS

5.01 rating
AI Summary
Motherboard & Development Board for premium buyers

The LILYGO® T-TWR REV2.1 ESP32-S3 Walkie-Talkie Development Board L76K GNSS Module With 1.3 inch OLED PMU AXP2102 Battery Holder GPS by LILYGO is a premium motherboard & development board designed for premium buyers. It features MCU: ESP32-S3-WR0OM-1-N16R8 and Flash: 16MB.

₹7,710-22%
MRP:₹10,699Save ₹2,989
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

22% Off — you save ₹2,989 on this product!

Price: ₹7,710

Total: ₹7,710
Buying tip: A top-tier option — the best features and quality available in this category.
Estimated delivery: 4 Aug18 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

MCU: ESP32-S3-WR0OM-1-N16R8
Flash: 16MB
PSRAM: 8MB
Wireless protocol: Wi-Fi & Bluetooth 5 (LE)
Onboard functions: 4 Buttons (PPT+Boot + PWR + Reset)
Supply Mode: USB / 21700 battery / 18650 battery + spring

Ideal For

Everyday convenience
Share:
SKU: bg-2036885Category: Motherboard & Development Board

About This Product

The LILYGO® T-TWR REV2.1 ESP32-S3 Walkie-Talkie Development Board L76K GNSS Module With 1.3 inch OLED PMU AXP2102 Battery Holder GPS by LILYGO is a premium motherboard & development board designed for premium buyers. It delivers reliable performance at an accessible price.

Key Specifications

  • MCU: ESP32-S3-WR0OM-1-N16R8
  • Flash: 16MB
  • PSRAM: 8MB
  • Wireless protocol: Wi-Fi & Bluetooth 5 (LE) — faster pairing, longer range, and lower battery draw
  • Onboard functions: 4 Buttons (PPT+Boot + PWR + Reset)
  • Supply Mode: USB / 21700 battery / 18650 battery + spring — keeps you powered without frequent recharging

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.




L76K GNSS Module:

 

1.3 inch SH1106 OLED:



Sample Code For Reference [Github]


Other Support: SoftRF Ham Edition OpenRTX for T-TWR Plus ESP32APRS ArcticTracker


Package includes:



Product Safety Information

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.