Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
SmartElex ESP32-C6-WROOM-1-N8 Development Board — image 1
Hover to zoom

1 / 3 · Click to enlarge

SmartElex

SmartElex ESP32-C6-WROOM-1-N8 Development Board

24+ bought in past month
AI Summary
SmartElex ZIGBEE Modules for everyday users

The SmartElex ESP32-C6-WROOM-1-N8 Development Board by SmartElex is a mid-range smartelex zigbee modules designed for everyday users. It features Item Type: Development Board and Operating Voltage (V): 3 to 3.6.

₹1,578
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,578
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: Development Board
Operating Voltage (V): 3 to 3.6
Frequency Rating: 2412 to 2484MHz
Operating Temperature (°C): –40 ~ 85 °C / - 40~105 °C
Bandwidth: 20 MHz and 40 MHz bandwidth
Data Rate: up to 150 Mbps

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-2177222Category: SmartElex ZIGBEE Modules

About This Product

The SmartElex ESP32-C6-WROOM-1-N8 Development Board by SmartElex is a mid-range smartelex zigbee modules designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Item Type: Development Board
  • Operating Voltage (V): 3 to 3.6 — works with standard household power
  • Frequency Rating: 2412 to 2484MHz — smooth, flicker-free operation
  • Operating Temperature (°C): –40 ~ 85 °C / - 40~105 °C
  • Bandwidth: 20 MHz and 40 MHz bandwidth — smooth, flicker-free operation
  • Data Rate: up to 150 Mbps
  • Bluetooth Version: Bluetooth 5, Bluetooth mesh — faster pairing, longer range, and lower battery draw
  • Shipping Weight: 0.03 kg

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

ESP32-C6-WROOM-1 is a general-purpose Wi-Fi, IEEE 802.15.4, and Bluetooth LE module. The rich set of peripherals and high performance make the module an ideal choice for smart homes, industrial automation, health care, consumer electronics, etc. ESP32-C6-WROOM-1 module features a 4 MB external SPI flash. ESP32-C6 integrates a rich set of peripherals including SPI, parallel IO interface, UART, I2C, I2S, RMT (TX/RX), LED PWM, USB Serial/JTAG controller, MCPWM, SDIO2.0 slave controller, GDMA, TWAI® controller, on-chip debug functionality via JTAG, SOC event task matrix, as well as up to 23 GPIOs, etc.

Features: 

  • Wi-Fi • 1T1R in 2.4 GHz band • Operating frequency: 2412 ~ 2484 MHz
  • Fully compatible with IEEE 802.11b/g/n protocol • 20 MHz and 40 MHz bandwidth • Data rate up to 150 Mbps
  • Bluetooth
  • Bluetooth LE: Bluetooth 5, Bluetooth mesh
  •  High power mode (share the same PA with Wi-Fi)
  •  Speed: 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps
  • IEEE 802.15.4• Compliant with IEEE 802.15.4-2015 protocol • OQPSK PHY in 2.4 GHz band • Data rate: 250 Kbps • Thread 1.x • Zigbee 3.0

Package Includes: 

1 x SmartElex ESP32-C6-WROOM-1-N8 Development Board

2 x Male Headers

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.