Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
SmartElex TB-03F Bluetooth Module — image 1
Hover to zoom

1 / 3 · Click to enlarge

SmartElex

SmartElex TB-03F Bluetooth Module

33+ bought in past month
AI Summary
SmartElex Bluetooth Modules for everyday users

The SmartElex TB-03F Bluetooth Module by SmartElex is a value-for-money smartelex bluetooth modules designed for everyday users. It features Item Type: Bluetooth Module and Frequency Rating: 2400 to 2483.5MHz.

wireless convenience
₹880
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹880
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: Bluetooth Module
Frequency Rating: 2400 to 2483.5MHz
Model No. / Name: TB-03F
Overall Dimension: 24*16*3(±0.2)MM
Wireless Standard: BT 5.0
Transmit Power (dBm): Maximum 10dBm

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-2177249Category: SmartElex Bluetooth Modules

About This Product

The SmartElex TB-03F Bluetooth Module by SmartElex is a value-for-money smartelex bluetooth modules designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Item Type: Bluetooth Module — faster pairing, longer range, and lower battery draw
  • Frequency Rating: 2400 to 2483.5MHz — smooth, flicker-free operation
  • Model No. / Name: TB-03F
  • Overall Dimension: 24*16*3(±0.2)MM
  • Wireless Standard: BT 5.0
  • Transmit Power (dBm): Maximum 10dBm
  • Receive sensitivity: -93dBm±2
  • Interface: GPIO/PWM/SPI/ADC/I2S — compatible with modern devices

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

TB-03F intelligent lighting module is a Bluetooth module designed based on the TLSR8253chip and conforming to BT 5.0 low power Tmall Genie Mesh. This module supports the direct control of Tmall Genie and has the Bluetooth mesh networking function. The devices are peered through Star network communication, using Bluetooth broadcast for communication, can ensure timely response in the case of multiple devices. This module is applied to intelligent light control, which can meet the requirements of low power consumption, low latency and short-range wireless data communication.

Features:

  • Can be directly controlled by Tmall Elf without a gateway
  • SMD-22 package
  • 6 PWM outputs
  • With on-board antenna, no need to design antenna
  • Brightness (duty cycle) adjustment range 5% -100%
  • Factory default 50% duty cycle for cool and warm colors
  • PWM output frequency 1KHz
  • Support multiple sleep modes, deep sleep current as low as 0.4uA
  • With wall switch to switch color temperature function
  • Support secondary development

Package Includes: 

1 x SmartElex TB-03F Bluetooth Module 2 x Male Headers

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.