SmartElex E18-2G4Z27SI 2.4GHz ZigBee Breakout Board — image 1

Hover to zoom

1 / 3 · Click to enlarge

SmartElex E18-2G4Z27SI 2.4GHz ZigBee Breakout Board

Name: SmartElex E18-2G4Z27SI 2.4GHz ZigBee Breakout Board
Brand: SmartElex
SKU: R150564
Price: 1429 INR
Availability: InStock

25+ bought in past month

AI Summary

SmartElex ZIGBEE Modules for everyday users

The SmartElex E18-2G4Z27SI 2.4GHz ZigBee Breakout Board by SmartElex is a value-for-money smartelex zigbee modules designed for everyday users. It features Item Type: Breakout Board and Operating Voltage (V): 2.5 to 3.6.

₹1,429

Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Quantity

Total: ₹1,429

Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.

Estimated delivery: 17 Aug – 31 Aug

Check delivery date

Free Shipping

Pan India delivery

15-Day Returns

Hassle-free policy

Secure Payment

Razorpay protected

Quality Assured

Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: Breakout Board

Operating Voltage (V): 2.5 to 3.6

Supported protocols: ZigBee3.0

Operating Temperature (°C): -40 ~ +85℃

Communication Interface: UART

Antenna Interface: IPEX-1

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping

SKU: robu-2177203Category: SmartElex ZIGBEE Modules

About This Product

The SmartElex E18-2G4Z27SI 2.4GHz ZigBee Breakout Board by SmartElex is a value-for-money smartelex zigbee modules designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

Item Type: Breakout Board
Operating Voltage (V): 2.5 to 3.6 — works with standard household power
Supported protocols: ZigBee3.0 — compatible with modern devices
Operating Temperature (°C): -40 ~ +85℃
Communication Interface: UART — compatible with modern devices
Antenna Interface: IPEX-1 — compatible with modern devices
Shipping Weight: 0.03 kg
Shipping Dimensions: 10 × 5 × 2 cm

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

E18 series is a 2.4GHz frequency band ZigBee communication protocol-to-serial wireless module designed and produced by Ebyte. The factory comes with self-organizing network firmware, ready to use, suitable for a variety of application scenarios (especially smart home). The E18 series module adopts CC2530 RF chip imported from Texas Instruments. The chip integrates 8051 single-chip microcomputer and wireless transceiver. Some module models have built-in PA power amplifier to increase the communication distance. The factory-built firmware implements serial data transparent transmission based on the ZigBee3.0 protocol, and supports various commands under the ZigBee3.0 protocol. After actual measurement, it has very good compatibility with most ZigBee3.0 products on the market.

Features:

Supporting protocol - ZigBee3.0
Operating Voltage- 2.5 ~ 3.6V
Operating temperature - -40 ~ +85℃
Network self-healing
Ultra-low power consumption
Data retention time setting
Channel change: Support 16 channel changes (2405-2480MHZ) from 11 to 26, and different channels correspond to different frequency.

Package Includes:

1 x SmartElex E18-2G4Z27SI 2.4GHz ZigBee Breakout Board

1 x UFL Antenna

3 x Male Headers

Setup Guide

Identify the pins

Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.

Wire to your microcontroller

Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.

Install libraries

In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.

Upload example sketch

Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.

Calibrate if needed

Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.