Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
SI4732 Chip and Crystal Oscillator Component Modification Module for Quansheng UVK5/K6 PLUS FPC Version — image 1
Hover to zoom

1 / 7 · Click to enlarge

SI4732

SI4732 Chip and Crystal Oscillator Component Modification Module for Quansheng UVK5/K6 PLUS FPC Version

5.035 ratings
AI Summary
Other Module Board for everyday users

The SI4732 Chip and Crystal Oscillator Component Modification Module for Quansheng UVK5/K6 PLUS FPC Version by SI4732 is a mid-range other module board designed for everyday users. Customers praise its easy to set up and use and fast and responsive. 100% of buyers rate it 4★ or above.

easy to set up and usefast and responsivecompact and portableaccurate and reliable
₹2,000
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹2,000
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 4 Aug18 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: bg-2016452Category: Other Module Board

About This Product

The SI4732 Chip and Crystal Oscillator Component Modification Module for Quansheng UVK5/K6 PLUS FPC Version by SI4732 is a mid-range other module board designed for everyday users. Customers highlight its easy to set up and use and fast and responsive.

Customer Verdict

100% of buyers rated this product 4 stars or above. The most appreciated qualities are: easy to set up and use, fast and responsive, compact and portable, accurate and reliable.

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.


Description:
It is suitable for Quansheng K5/Quansheng K6 to install S14732 soft board FPC and modify HF shortwave full-band reception/single sideband reception. It is suitable for single antenna and dual antenna.

Upgrade content:
1. Add an  RF amplifier to improve AM reception performance.
2. Add an audio amplifier to solve the problem of extremely low volume of SSB single sideband, and the effect is obvious.
3. Redesign FM and HF bandpass filters.
4. An ESD tube is added to the input terminal for electrostatic protection and strong signal protection when transmitting in the UV section of dual antennas.
5. Use FPC soft board, the board thickness is 0.2mm, safe and reliable without short circuit, and the installation does not support the speaker.
6. In the dual-antenna solution, an additional level of band-pass filtering is added to the antenna input end, and a feeder and SMA head are used to an HF independent antenna from the LED, which does not affect the UV performance of the original machine.
7. The FPC soft board uses a double-sided disk, which is easier to connect to the original machine.


Package includes:

1 x Modification Module kit



Product Safety Information

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.