Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
DIY AMG8833 Simple Thermal Imager PRO 1.6 Inch TFT Display Screen 10Hz Data Refresh Rate Support TF Card — image 1
Hover to zoom
Pricio

DIY AMG8833 Simple Thermal Imager PRO 1.6 Inch TFT Display Screen 10Hz Data Refresh Rate Support TF Card

AI Summary
Test & Measuring Module for DIY enthusiasts and makers

The DIY AMG8833 Simple Thermal Imager PRO 1.6 Inch TFT Display Screen 10Hz Data Refresh Rate Support TF Card by Pricio is a premium test & measuring module designed for DIY enthusiasts and makers.

₹8,013-16%
MRP:₹9,499Save ₹1,486
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

16% Off — you save ₹1,486 on this product!

Total: ₹8,013
Buying tip: A top-tier option — the best features and quality available in this category.
Estimated delivery: 4 Aug18 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: bg-2048681Category: Test & Measuring Module

About This Product

The DIY AMG8833 Simple Thermal Imager PRO 1.6 Inch TFT Display Screen 10Hz Data Refresh Rate Support TF Card by Pricio is a premium test & measuring module designed for DIY enthusiasts and makers. It delivers reliable performance at an accessible price.

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.


Features:
- The maximum detection ran-ge of the sensors is 7m.
- The sensors resolution ratio is 8 * 8, the display screen resolution ratio is 160 * 128.
- With 1.6inch TFT display screen, so you can see the data more clearly, give you a better using experience.
- Support TF card (FAT format) to storage the screenshot, you can also check the screenshot.
- The sensors temperature measuring ran-ge is 0~80℃, the temperature error is ±3℃, both the maximum and minimum values are displayed at 0 degrees, indicating out of range.

Specifications:
Material: PCB
Sensors data refresh rate: 10Hz
Sensors temperature measuring range: 0~80℃
Battery: 1 * lithium battery, 600mAh (included)
Item size: 66 * 43 * 11mm / 2.6 * 1.7 * 0.4in
Item weight: 41g / 1.4ounce

Package Included:
1 x AMG8833 Thermal Imager




Product Safety Information

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.