Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
Argon NEO 5 M.2 NVME PCIE for Raspberry Pi 5 Built-in Radiator Aluminum Alloy Shell — image 1
Hover to zoom

1 / 7 · Click to enlarge

Argon

Argon NEO 5 M.2 NVME PCIE for Raspberry Pi 5 Built-in Radiator Aluminum Alloy Shell

5.01 rating
AI Summary
Electronics for everyday users

The Argon NEO 5 M.2 NVME PCIE for Raspberry Pi 5 Built-in Radiator Aluminum Alloy Shell by Argon is a premium electronics designed for everyday users.

₹5,583-34%
MRP:₹8,499Save ₹2,916
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

34% Off — you save ₹2,916 on this product!

Color: Black

Black
Total: ₹5,583
Buying tip: A quality investment for dependable performance and premium build quality.
Estimated delivery: 4 Aug18 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Ideal For

Everyday convenience
Share:
SKU: bg-2013571Category: Electronics

About This Product

The Argon NEO 5 M.2 NVME PCIE for Raspberry Pi 5 Built-in Radiator Aluminum Alloy Shell by Argon is a premium electronics designed for everyday users. It delivers reliable performance at an accessible price.

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

Description:
1. Argon NEO 5 M.2 NVME Case further expands your Raspberry Pi 5 potential with included M.2 NVME Expansion Board support.
2. Boot your Raspberry Pi 5 from an NVME M.2 Drive.
3. Built-in HEATSINK for your M.2 NVME Drive
4. Enjoy faster and higher storage access by connecting M.2 NVME drives via the PCIe slot on the Raspberry Pi 5
5. Versatile M.2 NVME support compatible with any M.2 NVME with M-Key up to 2280 size
6. Greater thermal management on M.2 NVME with included aluminum heatsink specific to M.2 drive to keep it cool, efficient and working longer
7. Reliable and consistent data transfer with included FPC impedance controlled cable


Note:


1. Need to install by yourself.

2. This product is available in External shell/bottom shell, and the prices vary greatly. Please pay attention before purchasing.

3. This product does not include the Raspberry Pi motherboard and SSD card.

M.2 NVMe Driver Compatibility:
Western Digital SN850
Western Digital SN740
Western Digital SN570
Western Digital SN530
Western Digital Black SN750 SE (Phison Control ler)
for Samsung 980 Pro
for Samsung 980
Sabr. ent Rocket Nano
Sabrent Rocket 4. 0
for PNY CS1030 .
0rigin Inception TLC830 Pro NVMe
Netac NV3000 NVMe SSD
Netac NV2000 NVMe SSD
for Lexar, NM710
for Lexar. NM620
Kioxia Exceria NVMe. SSD .
Kioxia Exceria G2 NVMe SSD
for Kingston KC3000
for Kingston SNV2S NV2 Gen4 PCle NVMe M. 22280 Solid-State
Drive
Inland PCle NVMe SSD
for Crucial P3 Plus M. 2
for Crucial P3 M.2
for Crucial P2 M.2
for AxeMemory Generic Drive
AData XPG SX8200 Pro

Package Include:
1x Shell(External/Bottom Optional)



Product Safety Information

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.