Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
XH-W1401 DC12V Digital Thermostat Temperature Controller With NTC Sensor & LED Display — image 1
Hover to zoom

1 / 3 · Click to enlarge

XH-W1401 DC12V Digital Thermostat Temperature Controller With NTC Sensor & LED Display

28+ bought in past month
AI Summary
Temperature Meter & Controllers for everyday users

The XH-W1401 DC12V Digital Thermostat Temperature Controller With NTC Sensor & LED Display is a value-for-money temperature meter & controllers designed for everyday users. It features Voltage Rating: 12 and Model No. / Name: XH W1401.

₹922
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹922
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Voltage Rating: 12
Model No. / Name: XH W1401
Measurement Range: -9℃ to 99℃ Thermostat
Refresh Rate (Hz): 0.5 Sec
Length (mm): 78
Width (mm): 51

Ideal For

Everyday convenience
Share:
SKU: robu-815825Category: Temperature Meter & Controllers

About This Product

The XH-W1401 DC12V Digital Thermostat Temperature Controller With NTC Sensor & LED Display is a value-for-money temperature meter & controllers designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Voltage Rating: 12 — works with standard household power
  • Model No. / Name: XH W1401
  • Measurement Range: -9℃ to 99℃ Thermostat — reliable connection even at a distance
  • Refresh Rate (Hz): 0.5 Sec — smooth, flicker-free operation
  • Length (mm): 78
  • Width (mm): 51
  • Shipping Weight: 0.05 kg
  • Shipping Dimensions: 8 × 6 × 3 cm

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

XH-W1401 DC12V Digital Thermostat Temperature Controller With NTC Sensor & LED Display is a dual temperature controlled thermostat. This module can control both heater and cooler and you can set it according to your application. An NTC temperature sensor is provided for monitoring temperature from a range of -9℃ to 99℃. A relay is provided for AC or DC load control the relay can control up to 10 amperes. The module input voltage (supply voltage) is 12 volts DC. Note: This Product is available in three different variants (XH-W1401, HW-559, and HCW M141) with the same working we will ship it randomly.

Features:

  1. Imported High-Speed single-chip microcomputer.
  2. Three Display output status indicator.
  3. Automatically judge heating and cooling according to set temperature.
  4. Setting range is wide -9°C~99°C
  5. Used in various temperature control, water temperature control, incubators, etc.

Package Includes:

1 x XH-W1401 DC12V Thermostat Intelligent Digital Thermostat Temperature Controller With Led Display

1 x NTC Temperature Sensor

 

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.