Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
Waveshare USB-C Adapter For NGFF SSD USB3.2 Gen2 Type-C — image 1
Hover to zoom

1 / 4 · Click to enlarge

WAVESHARE

Waveshare USB-C Adapter For NGFF SSD USB3.2 Gen2 Type-C

4.02 ratings
635+ bought in past month
AI Summary
USB Interface Module for everyday users

The Waveshare USB-C Adapter For NGFF SSD USB3.2 Gen2 Type-C by WAVESHARE is a value-for-money usb interface module designed for everyday users. It features USB: USB 3.0 and Supported: 2230 / 2242 / 2260 / 2280, etc M,2 SSD. Customers praise its easy to set up and use and fast and responsive.

easy to set up and usefast and responsiveUSB rechargeable
₹1,439
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,439
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

USB: USB 3.0
Supported: 2230 / 2242 / 2260 / 2280, etc M,2 SSD
Interface Type: SATA
Controller: VL716
Indicator: Flash red when writing/reading
OS Supports: Supported : Win7/8/8.10, Mac, Linux, Android

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-1219086Category: USB Interface Module

About This Product

The Waveshare USB-C Adapter For NGFF SSD USB3.2 Gen2 Type-C by WAVESHARE is a value-for-money usb interface module designed for everyday users. Customers highlight its easy to set up and use and fast and responsive.

Key Specifications

  • USB: USB 3.0
  • Supported: 2230 / 2242 / 2260 / 2280, etc M,2 SSD — compatible with modern devices
  • Interface Type: SATA — compatible with modern devices
  • Controller: VL716
  • Indicator: Flash red when writing/reading
  • OS Supports: Supported : Win7/8/8.10, Mac, Linux, Android — compatible with modern devices
  • Shipping Weight: 0.020 kg
  • Shipping Dimensions: 8 × 5 × 3 cm

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

Waveshare USB-C Adapter For NGFF SSD USB3.2 Gen2 Type-C

USB-C ADAPTER FOR SSD

For NGFF M.2 SSD, Fast Reading/Writing, Reutilizing Your Idle SSD

M.2 NGFF Protocol Support

 

Transforming SSD Into USB Flash Drive

Transforming Your M.2 SSD Into A Fresh New USB Flash Drive In Seconds

Compatible With Different Sizes Of M.2 SSD

Compatible With M.2 SSD In 2230 / 2242 / 2260 / 2280 Specifications

Immersion Gold Process Better Heat Dissipation

Double Sides Immersion Gold Process, Combined With The Tiny Through Holes, Faster Heat Dissipation Effect

Onboard Operating Indicator

The LED Lights Up When Power-On, And Keeps Blinking While Reading/Writing

Outline Dimensions


Features: 

  1. Fast Reading/Writing USB-C Connector, Up To 6 Gbps/S Theoretical Data Rate,
  2. Faster Reading/Writing Speed Than a Normal USB Flash Drive,
  3. Releasing The Original Performance Of SSD

Package Includes:

1 x USB-C adapter for SSD

1 x USB3.0 Type-A to Type-C cable ~15cm

1 x Screwdriver

1 x Screw

 

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.