Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
Waveshare 2.9 inch 296 x 128 Pixel Touch Black / White e-Paper Module for Raspberry Pi Pico, SPI Interface — image 1
Hover to zoom

1 / 5 · Click to enlarge

Waveshare 2.9 inch 296 x 128 Pixel Touch Black / White e-Paper Module for Raspberry Pi Pico, SPI Interface

Color
AI Summary
Board & Shield for everyday users

The Waveshare 2.9 inch 296 x 128 Pixel Touch Black / White e-Paper Module for Raspberry Pi Pico, SPI Interface is a mid-range board & shield designed for everyday users. It features One Package Weight: 0.09kgs / 0.19lb and One Package Size: 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch.

₹3,284
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹3,284
Buying tip: A quality investment for dependable performance and premium build quality.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

One Package Weight: 0.09kgs / 0.19lb
One Package Size: 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch
Best Sellers Rank (Consumer Electronics): #1828
Best Sellers Rank (Consumer Electronics > Electronics Module): #48
Best Sellers Rank (Consumer Electronics > Electronics Module > Modules Expansions Accessories): #12

Ideal For

Everyday convenience
Share:
SKU: S-DIY0186Category: Board & Shield

About This Product

The Waveshare 2.9 inch 296 x 128 Pixel Touch Black / White e-Paper Module for Raspberry Pi Pico, SPI Interface is a mid-range board & shield designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • One Package Weight: 0.09kgs / 0.19lb
  • One Package Size: 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch
  • Best Sellers Rank (Consumer Electronics): #1828
  • Best Sellers Rank (Consumer Electronics > Electronics Module): #48
  • Best Sellers Rank (Consumer Electronics > Electronics Module > Modules Expansions Accessories): #12

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

1. 2.9 inch capacitive touch ePaper module, 296??128 resolution 2. 5-points touch support, user-defined wakeup gesture 3. No backlight, keeps displaying last content for a long time even when power down 4. Ultra low power consumption, basically power is only required for refreshing 5. SPI / I2C interface, requires minimal IO pins 6. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.