Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
OF06ZAT G3/4 DN20 Water Flow Sensor (Sea) Milk/Diesel/Gasoline/Oil Flow Meter — image 1
Hover to zoom

OF06ZAT G3/4 DN20 Water Flow Sensor (Sea) Milk/Diesel/Gasoline/Oil Flow Meter

27+ bought in past month
AI Summary
Flow Sensors for everyday users

The OF06ZAT G3/4 DN20 Water Flow Sensor (Sea) Milk/Diesel/Gasoline/Oil Flow Meter is a mid-range flow sensors designed for everyday users. It features Model No. / Name: Water Flow Sensor and Operating Voltage (VDC): 7 to 24.

₹2,289
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹2,289
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 23 Aug6 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Model No. / Name: Water Flow Sensor
Operating Voltage (VDC): 7 to 24
Frequency (Hz): Approx. 30Hz
Power Consumption (W): 0.2VA or less
Structure: Splash-proof structure (IP64 compatible) for indoor use
Connector Type: G3/4"

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
IP Rated
Share:
SKU: robu-1165457Category: Flow Sensors

About This Product

The OF06ZAT G3/4 DN20 Water Flow Sensor (Sea) Milk/Diesel/Gasoline/Oil Flow Meter is a mid-range flow sensors designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Model No. / Name: Water Flow Sensor
  • Operating Voltage (VDC): 7 to 24 — works with standard household power
  • Frequency (Hz): Approx. 30Hz — smooth, flicker-free operation
  • Power Consumption (W): 0.2VA or less
  • Structure: Splash-proof structure (IP64 compatible) for indoor use — protected against splashes and rain
  • Connector Type: G3/4" — compatible with modern devices
  • Maximum Power Rating(W): 0.2VA or less
  • Protection level: Splash-proof structure (IP64) — protected against splashes and rain

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

OF06ZAT G3/4 DN20 Water Flow Sensor includes a plastic body housing, rotor / Oval gear, and a hall-effect sensor, and PCB electronics board. When the water/liquid flows through the (oval gear) rotor, then the rotor is rolled. Its speed changes with different rates of flow. Then the magnetic rotor makes a reaction to the Hall sensor, the hall-effect sensor outputs the corresponding pulse signal.

Features: 

  1. Flow range : 0-50LPM
  2. Flow sensor connecting type: G 3/4"
  3. Accuracy: ±0.5%
  4. Working environmental: milk, liquid,  light oil, diesel
  5. Material: RoHs,  no-toxic
  6. Structure: Splash-proof structure (IP64 compatible) for indoor use
  7. Open collector output: Open collector pulse (Capacity: 6 mA DC or less)

Package Includes:

1 x OF06ZAT G3/4 DN20 Water Flow Sensor (Sea)

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.