Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
Upgraded 4-in-1 Expansion Board with 5G WiFi Module 433M CC1101 ESP32-C5 Predators Module GPS for Flipper Zero with 2.8-inch Screen — image 1
Hover to zoom

Upgraded 4-in-1 Expansion Board with 5G WiFi Module 433M CC1101 ESP32-C5 Predators Module GPS for Flipper Zero with 2.8-inch Screen

5.01 rating
371+ bought in last month
AI Summary
product for premium buyers

The Upgraded 4-in-1 Expansion Board with 5G WiFi Module 433M CC1101 ESP32-C5 Predators Module GPS for Flipper Zero with 2.8-inch Screen is a premium product designed for premium buyers.

₹9,060-31%
MRP:₹13,159Save ₹4,099
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

31% Off — you save ₹4,099 on this product!

Total: ₹9,060
Buying tip: A top-tier option — the best features and quality available in this category.
Estimated delivery: 27 Aug – 10 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Ideal For

Everyday convenience
Share:
SKU: bg-2048688

About This Product

The Upgraded 4-in-1 Expansion Board with 5G WiFi Module 433M CC1101 ESP32-C5 Predators Module GPS for Flipper Zero with 2.8-inch Screen is a premium designed for premium buyers. It delivers reliable performance at an accessible price.

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.


Specifications:
ESP32 Chip: Supported
Touchscreen: 2.8-inch
Battery Capacity: 800 mAh
GPS Access: Supported
SD Card Slot: Supports logging and firmware updates
USB-C Charging: Supported
WiFi Antenna: Built-in
Firmware Version: Marauder or other compatible firmware
4-Pin GPIO Programming Interface: None (No additional required)
USB-C Programming/Charging Interface: Supported
Control Mode Chipset: ESP32-C5
Control Mode Firmware: Marauder
WiFi Capability: 5G and 2.4G Dual-Band
Control Mode Firmware Update: Completed via USB-C interface
Flipper Zero Application Support: Yes (Pre-installed with third-party FZ firmware)
GPS Chip (with antenna): Supported, dual-device access possible
CC1101 Chip (433 MHz, with antenna): Supported
Casing: 3D printed

Features:
1.Dual Operation Modes: Operates independently or via Flipper Zero without manual switching.
2.Enhanced WiFi Support: Supports both 5G and 2.4G networks with Marauder firmware for advanced 5G functionality.
3.Standalone Module: Equipped with a touchscreen, GPS, and a rechargeable battery for full standalone use.
4.Simplified Firmware Updates: Easy firmware updates through USB-C interface.
5.Seamless Flipper Zero Integration: Preloaded with third-party FZ-compatible apps to enhance usability.

Package Included:
1 x Main Unit
4 x Antennas


Product Safety Information
Product Safety Information
Manufacturer
Shenzhen Yuner Yipu Trading Co., Ltd
Address
East 1087, Building 4, SEG Science and Technology Park, No. 3012 Huaqiang North Road, Huaqiang North Street, Futian District, Shenzhen, Guangdong, CN
European agent
VISHTEC ltd
Email
compliance@vish-tec.com
Address
3 rd floor office 5, Plovdiv 2 Liuben Karavelov bul, 4002 Bulgaria
UK agent
CET Product Service Ltd.
Email
info@cetproduct.com
Address
Beacon House Stokenchurch Business Park, Ibstone Rd, Stokenchurch, High Wycombe, Buckinghamshire, UK

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.