Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
Unsoldered Lora 915MHz Shield for TTGO T-SIM7000G Module — image 1
Hover to zoom

Unsoldered Lora 915MHz Shield for TTGO T-SIM7000G Module

24+ bought in past month
AI Summary
GSM and RF Antenna for everyday users

The Unsoldered Lora 915MHz Shield for TTGO T-SIM7000G Module is a mid-range gsm and rf antenna designed for everyday users. It features Operating Frequency (MHz): 915 and Operating Voltage: 3.3 – 7 V.

₹2,199
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹2,199
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Operating Frequency (MHz): 915
Operating Voltage: 3.3 – 7 V
Operating Temperature (°C): -40 to 90°C
Data Transfer Rate: 150 Mbps @ 11n HT40, 72 Mbps @ 11n HT20, 54 Mbps @ 11g, 11 Mbps @ 11b
Transmit Power (dBm): 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n
Receiver Sensitivity: up to -98 dBm

Ideal For

Everyday convenience
Share:
SKU: robu-1165453Category: GSM and RF Antenna

About This Product

The Unsoldered Lora 915MHz Shield for TTGO T-SIM7000G Module is a mid-range gsm and rf antenna designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Operating Frequency (MHz): 915 — smooth, flicker-free operation
  • Operating Voltage: 3.3 – 7 V — works with standard household power
  • Operating Temperature (°C): -40 to 90°C
  • Data Transfer Rate: 150 Mbps @ 11n HT40, 72 Mbps @ 11n HT20, 54 Mbps @ 11g, 11 Mbps @ 11b
  • Transmit Power (dBm): 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n
  • Receiver Sensitivity: up to -98 dBm
  • UDP sustained throughput: 135 Mbps
  • Shipping Weight: 0.04 kg

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

The 915 MHz antenna needs to be connected with the IPEX interface (If the antenna is not connected, the signal may be almost. When the battery is full, the blue LED will stop working. When using, pay attention to “+” and “-” of the battery, otherwise, it will be damaged. With the IO port touchscreen touch signal input, you need to add the 100nF pull-down capacitor to this pin.

Features: 

  1. SX1276 chip based on ESP32 Wi-Fi, 868 – 915 MHz frequency, high sensitivity over -148 dBm, + 20 dBm output power, high reliability, long-transmission distance
  2. Onboard 32 MB flash Wi-Fi antenna, 0.96-inch OLED display, lithium battery charging circuit, CP2102 interface, and USB serial chip, perfect support for Arduino development environment, can be used for program checking, product development is very easy and fast
  3. Support for Sniffer software protocol analysis, Station, SoftAP, and Wi-Fi Direct modes

Package Includes:

1 x Unsoldered Lora 915MHz Shield for TTGO T-SIM7000G Module

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.