Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
Switching Power Board AC-DC 90-265V to 24V 4A 120W — image 1
Hover to zoom

1 / 5 · Click to enlarge

Switching Power Board AC-DC 90-265V to 24V 4A 120W

28+ bought in past month
AI Summary
AC to DC Power Supply Module for everyday users

The Switching Power Board AC-DC 90-265V to 24V 4A 120W is a value-for-money ac to dc power supply module designed for everyday users. It features Output Voltage: 24 and Output Current (A): 4.

₹1,320
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,320
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 18 Aug1 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Output Voltage: 24
Output Current (A): 4
Output Power (W): 120
Frequency (Hz): 50HZ/60HZ
Length (mm): 11(mm)
Width (mm): 6(mm)

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-1187447Category: AC to DC Power Supply Module

About This Product

The Switching Power Board AC-DC 90-265V to 24V 4A 120W is a value-for-money ac to dc power supply module designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Output Voltage: 24 — works with standard household power
  • Output Current (A): 4
  • Output Power (W): 120
  • Frequency (Hz): 50HZ/60HZ — smooth, flicker-free operation
  • Length (mm): 11(mm)
  • Width (mm): 6(mm)
  • Weight (g): 144g
  • Shipping Weight: 0.162 kg

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

A switched-mode power supply (switching-mode power supply, switch-mode power supply, switched power supply, SMPS, or switcher) is an electronic power supply that incorporates a switching regulator to convert electrical power efficiently. A switched-mode power supply (SMPS) can be understood as an electronic circuit converting power with switching devices that turn on and off at high frequencies. They are also storage component like inductors or capacitors that supplies power when the switching as at its non-conduction state Wide input voltage range AC 90-265v 50/60Hz, output DC 24V 4A, the output power is 120W. Perfectly designed and well constructed, small and compact size with an indicator. Made of double-sided PCB, good stability and reliability; more suitable for power supply in industrial control systems. The power supply has overcurrent protection, overload and short circuit protection


Features:

  1. The power supply has overcurrent protection, overload protection and short circuit protection
  2. AC90 ~ 265V wide voltage input, DC 24V power
  3. Small size, with indicator light
  4. The output power is up to 120W
  5. Double-sided PCB design, performance is more stable, more reliable

Packages Includes: 

1 x Switching Power Board AC-DC 90-265V to 24V 4A 120W

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.