STMICROELECTRONICS Expansion Board, IPS160HF, STM32 Nucleo Development Board

Industrial digital output expansion board for STM32 Nucleo provides a powerful and flexible evaluation and development environment for 2A (typ) digital output modules, featuring the safe driving and smart diagnostic capabilities of the IPS160HF single high-side switch. The X-NUCLEO-OUT08A1 interfaces with the microcontroller on the STM32 Nucleo via 3KV optocouplers driven by GPIO pins and Arduino™ UNO R3 (default configuration) and ST morpho (optional, not mounted) connectors. The expansion board should be connected to either a NUCLEO-F401RE or NUCLEO-G431RB development board and can also be stacked with another XNUCLEO-OUT08A1 or X-NUCLEO-OUT10A1. Two X-NUCLEO-OUT08A1 expansion boards allows you to evaluate a dual channel digital output module with 2A (typ.) capability each, or a 2A (typ.) single channel safety digital output module. In the second scenario, the first shield output is connected to the supply of the second one.

Note: For more technical details go through Datasheet in the attachment section

---

Features: 

1. Based on IPS160HF single high-side switch, which features: – Operation up to 60 V/2.4 A – Low power dissipation (RON(MAX) = 120 mΩ) – Fast decay for inductive loads – Open load detection and diagnostics – Overload and overheating protections with thermal shut-down and cut-off – PowerSSO-12L package
2. Application board operating range: 12 to 33 V/0 to 2.4 A
3.  Extended voltage operating range (J1 open) up to 60 V
4.  Status and diagnostic LEDs
5.  3 kV galvanic isolation
6.  Supply rail reverse polarity protection
7.  Ready for Safety Digital Output Architecture
8.  EMC compliance with IEC61000-4-2, IEC61000-4-3, IEC61000-4-5
9.  Wide application development potential in STM32 Nucleo development environment
10.  Equipped with Arduino™ UNO R3 connectors

---

Package Includes:

1 x STMicroelectronics Expansion Board, IPS160HF, STM32 Nucleo Development Board