Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
Short Truck Climbing Model RC Car Hardened Steel Gear 0.8 Module 5MM Inner Diameter Motor Gear Set Parts — image 1
Hover to zoom

1 / 8 · Click to enlarge

Pricio

Short Truck Climbing Model RC Car Hardened Steel Gear 0.8 Module 5MM Inner Diameter Motor Gear Set Parts

5.02 ratings
AI Summary
Toys Hobbies and Robot for children and parents

The Short Truck Climbing Model RC Car Hardened Steel Gear 0.8 Module 5MM Inner Diameter Motor Gear Set Parts by Pricio is a mid-range toys hobbies and robot designed for children and parents.

₹2,000
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Price: ₹2,000

Total: ₹2,000
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 4 Aug18 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Ideal For

Hobbyist flyingOutdoor recreationKids entertainment
Share:
SKU: bg-2024429Category: Toys Hobbies and Robot

About This Product

The Short Truck Climbing Model RC Car Hardened Steel Gear 0.8 Module 5MM Inner Diameter Motor Gear Set Parts by Pricio is a mid-range toys hobbies and robot designed for children and parents. It delivers reliable performance at an accessible price.

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

Descriptions:
Product Name: Short Truck Off-road Climbing Model Hardened Steel Gear
Material: 45# Steel Hardened
Inner Diameter of Motor Gear: 5MM
Motor Gear: 11-35T
Weight:
11T+12T+13T+14T+15T=40.28g
16T+17T+18T+19T+20T=62.2g
21T+22T+23T+24T+25T=76.56g
26T+27T+28T+29T+30T=96g
31T+32T+33T+34T+35T=120.1g

Feature:
Motor gear has 5mm hole,one 5mm to 3.175mm shaft is added. This allows it to be compatible with 5mm motor shafts and 3.175 motor shafts, making it more versatile. Different T numbers of the gear sets can provide you with different speed experiences, so you can find the right gear for you.

Note: Since 11T-14T gears are relatively small, there is no place to mark them and they cannot be distinguished. Just count the number of gear teeth.

Package included:
5x Steel Gear
5x 5mm to 3.175mm Shafts
1x Jimmy Screw
1x Wrench




Product Safety Information

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.