RP2350-PiZero Development Board Based On Raspberry Pi RP2350B Dual-core & Dual-architecture Microcontroller 520KB SRAM and 16MB Onboard Flash Memory

RP2350-PiZero is a high-performance and cost-effective microcontroller board, onboard DVI interface, TF card slot and PIO-USB port, compatible with Raspberry Pi 40PIN GPIO header, with reserved solder pads for PSRAM chip expansion, easy to develop and integrate into products.

1. RP2350B microcontroller chip designed by Raspberry Pi in the United Kingdom 2. Adopts unique dual-core and dual-architecture design: dual ARM Cortex-M33 or dual Hazard3 RISC-V processors support, flexible clock running up to 150 MHz 3. 520KB of SRAM, and 16MB of onboard Flash memory, with reserved solder pads for PSRAM chip expansion 4. Type-C connector for easier use 5. Onboard DVI interface can drive most HDMIscreens (DVI compatibility required) 6. Supports using as a USB host or device via onboard PIO-USB port 7. Onboard TF card slot for reading and writing TF card 8. Onboard Lithium battery recharge/discharge header, suitable for mobile scenarios 9. USB 1.1 with device and host support 10. Low-power sleep and dormant modes 11. Drag-and-drop programming using mass storage over USB 12. Adapting 5 × multi-function GPIO pins 13. 2 × SPI, 2 × I2C, 2 × UART, 2 × 12-bit ADC, 16 × controllable PWM channels 14. Accurate clock and timer on-chip 15. Temperature sensor 16. Accelerated floating-point libraries on-chip 17. 12 × Programmable I/O (PIO) state machines for custom peripheral support

Package includes:

1 x RP2350-PiZero