Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
Reyax RYS8833 Ultra Low Power 1.8V UART/I2C Interface GNSS Module — image 1
Hover to zoom

1 / 2 · Click to enlarge

Reyax

Reyax RYS8833 Ultra Low Power 1.8V UART/I2C Interface GNSS Module

29+ bought in past month
AI Summary
GSM GPRS and GNSS Modules for everyday users

The Reyax RYS8833 Ultra Low Power 1.8V UART/I2C Interface GNSS Module by Reyax is a value-for-money gsm gprs and gnss modules designed for everyday users. It features Item Type: Module and Module Type: GNSS Module.

₹1,413
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,413
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: Module
Module Type: GNSS Module
Voltage Rating: 0.9 to 1.95
Idle Current: 3.7
Operating Temperature (°C): -40 to 85
Cold start: 35sec

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-2117289Category: GSM GPRS and GNSS Modules

About This Product

The Reyax RYS8833 Ultra Low Power 1.8V UART/I2C Interface GNSS Module by Reyax is a value-for-money gsm gprs and gnss modules designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Item Type: Module
  • Module Type: GNSS Module
  • Voltage Rating: 0.9 to 1.95 — works with standard household power
  • Idle Current: 3.7
  • Operating Temperature (°C): -40 to 85
  • Cold start: 35sec
  • Shipping Weight: 0.005 kg
  • Shipping Dimensions: 6 × 5 × 1 cm

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

The RYS8833 is a multi-GNSS module with high sensitivity, the RYS8833 also has integrated digital noise filters and spectrum analyzer.

Features:

  1. SONY CXD5605AGF Engine
  2. A multi-GNSS module for GPS(L1 C/A), GLONASS(L1 OF), SBAS(L1 C/A), QZSS(L1 C/A), Galileo(E1 CBOC), and BeiDou(B1, specific Firmware)
  3. Including SAW filter, LNA and TCXO
  4. Embedded digital noise filters and spectrum analyzer
  5. UART / I2C Interface optional

Package Includes:

1 x Reyax RYS8833 Ultra Low Power 1.8V UART/I2C Interface GNSS Module

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.