Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
Reyax RYRR30I Multiprotocol Fully Integrated 13.56MHz RFID Module — image 1
Hover to zoom

1 / 2 · Click to enlarge

Reyax

Reyax RYRR30I Multiprotocol Fully Integrated 13.56MHz RFID Module

28+ bought in past month
AI Summary
IoT Development Boards for everyday users

The Reyax RYRR30I Multiprotocol Fully Integrated 13.56MHz RFID Module by Reyax is a mid-range iot development boards designed for everyday users. It features Model No. / Name: RYRR30I and Operating Voltage (V): 3 to 3.6.

₹2,634
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹2,634
Buying tip: A quality investment for dependable performance and premium build quality.
Estimated delivery: 23 Aug6 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Model No. / Name: RYRR30I
Operating Voltage (V): 3 to 3.6
Baud Rate (bps): 115200
Operating Temperature (°C): -40 to 85
Shipping Weight: 0.01 kg
Shipping Dimensions: 5 × 3 × 3 cm

Ideal For

Everyday convenience
Share:
SKU: robu-2117283Category: IoT Development Boards

About This Product

The Reyax RYRR30I Multiprotocol Fully Integrated 13.56MHz RFID Module by Reyax is a mid-range iot development boards designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Model No. / Name: RYRR30I
  • Operating Voltage (V): 3 to 3.6 — works with standard household power
  • Baud Rate (bps): 115200
  • Operating Temperature (°C): -40 to 85
  • Shipping Weight: 0.01 kg
  • Shipping Dimensions: 5 × 3 × 3 cm

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

The RYRR30I module is a 13.56-MHz RFID and Near Field Communication (NFC) system. Built-in programming options make the device suitable for a wide range of applications for proximity and vicinity identification systems.
Note: To Know more details please refer to datasheet on attachment section.

Features:

  1. Supports Near Field Communication (NFC) Standards NFCIP-1 (ISO/IEC 18092) Active P2P.
  2. Completely Integrated Protocol Handling for ISO15693, ISO14443A, ISO14443B and FeliCa.
  3. Capacitive sensing - Wake-up
  4. Industrial NFC/RFID Engine.
  5. Firmware upgrade via UART Interface.
  6.  Operation Temperature range: -40 to +85°C.

Package Includes:

1 x Reyax RYRR30I Multiprotocol Fully Integrated 13.56MHz RFID Module

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.