Hover to zoom
1 / 7 · Click to enlarge
Pricio
QC4.0 QC3.0 LED Dual USB 5V 4.5A 22.5W Micro/Type-C USB Mobile Power Bank 18650 Charging Module Temperature / Circuit Protection
5.09 ratingsAI Summary
Electronics for everyday usersThe QC4.0 QC3.0 LED Dual USB 5V 4.5A 22.5W Micro/Type-C USB Mobile Power Bank 18650 Charging Module Temperature / Circuit Protection by Pricio is a mid-range electronics designed for everyday users. Customers praise its excellent build quality and fast and responsive. 100% of buyers rate it 4★ or above.
✓ excellent build quality✓ fast and responsive
₹2,000
Free Shipping💵 COD Available
Available Offers
Free Delivery on this order. No minimum order value.
15-Day Easy Returns — hassle-free return & full refund.
Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.
Total: ₹2,000
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 4 Aug – 18 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only
Available Offers
💳
5% Cashback
Pay with UPI & get 5% cashback (up to ₹50) via Razorpay
🏦
No-Cost EMI
Available on select bank cards at checkout. 0% interest for 3 months.
📦
Free Shipping
Free delivery on all orders. No minimum order value.
💵
Cash on Delivery
COD available on orders up to ₹5,000 across India.
Ideal For
Hobbyist flyingOutdoor recreationKids entertainment
SKU: bg-1975902Category: Electronics
About This Product
The QC4.0 QC3.0 LED Dual USB 5V 4.5A 22.5W Micro/Type-C USB Mobile Power Bank 18650 Charging Module Temperature / Circuit Protection by Pricio is a mid-range electronics designed for everyday users. Customers highlight its excellent build quality and fast and responsive.
Customer Verdict
100% of buyers rated this product 4 stars or above. The most appreciated qualities are: excellent build quality, fast and responsive.
Why Buy from Pricio?
Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.
Specification:
【SWITCH CHARGING】:
Current up to 5A, efficiency up to 95%
Support 4.2/4.35/4.4/4.5v battery type
Support for JEITA specification
Support temperature loop control
【SYNCHRONOUS BOOST】:
Output power up to 22.5w, efficiency up to 95%
Automatic load detection / light load detection
Support wireless charging mode
Support small current mode
【OUTPUT FAST CHARGING PROTOCOL】:
Support PPS / pd3.0/ pd2.0
Support qc4 +/ qc4 / qc3.0/ qc2.0
Support AFC
Support FCP
Support SCP
Support pe2.0/ pe1.1
Support SFCP
Support for vooc
【INPUT FAST CHARGING PROTOCOL】:
Support pd3.0 / pd2.0
Support AFC
Support FCP
Support SCP
Support pe1.1
【TYPE-C INTERFACE】:
Built in USB type-C interface logc
Support Try. SRC function
【BC1.2 MODULE】:
Support bc1.2 DCP mode
Support for apple / for Samsung mode
【LIGHTING DECRYPTION】:
Built in lighting decryption function
【BUILT IN 12BIT ADC FOR POWER METERING AND DISPLAY】:
Built in coulometer for accurate electric quantity
【PROTECTION MECHANISM】:
Input Overvoltage Protection
Output over current / short circuit protection
Charging timeout / overvoltage protection
Temperature protection
Three Charging Process:
Trickle mode, constant current mode and constant voltage mode.
Package Include:
When the battery voltage is lower than 3V, the charging module is in trickle mode and the charging current is 300mA;
When the battery voltage is greater than 3V, the charging module will enter the constant current mode. At this time, it will charge at full speed according to the set target current, and the power can be about 21W;
When the battery voltage rises to the charging target voltage (such as 4.2V), the charging module enters the constant voltage mode, and the current gradually decreases while the battery terminal voltage remains unchanged;
When the charging current decreases to the cut-off current, the charging ends. After full charge, if the battery voltage drops to 0.1V lower than the target voltage, it will automatically restart charging.
(Note: if the voltage exceeds 4.2V, it is normal and the battery will not be damaged. When the voltage is 4.2V, the light is still flashing, which means it is not fully charged. Full charge depends not only on the charging voltage.)
There are five USB ports in the motherboard,which are Type-A1 + Type-A2 + Micro-B + Type-C + Lighting,
Type-A1 and Type-A2 support QC3.0/QC2.0/AFC/FCP/SCP/PE2.0/PE1.1/SFCP/VOOC fast charging output;
Type-C supports PPS/PD3.0/PD2.0/QC4+/QC3.0/QC2.0/AFC/FCP/SCP/PE2.0/PE1.1/SFCP fast charging output,
Support PD3.0/PD2.0/AFC/FCP/SCP/PE1.1 fast charging input;
Micro-b supports QC2.0/AFC/FCP/SCP/PE1.1 fast charging input;
Lighting supports PD fast charging and 5v2.4a slow charging.
When the input matches the fast charging, the default input is 9V, and the input power can reach 21W.
Support filling and discharging at the same time. It supports fast charging input and output in single port operation and 5V input and output in multi port operation.
Support simultaneous external discharge of Type-A1/ Type-A2 / Type-C ports.
Integrated PPS/PD3.0/PD2.0 fast charging protocol, support input and output bidirectional fast charging.PPS output supports 5-5 9V@3A , 5-11V@2A , PD3.0/PD2.0 output support 5V@3A , 9V@2A, 12V@1.5A . The input voltage supports 5V/9V/ 12V.
Integrated QC fast charging protocol, support QC4+/QC4/QC3.0/QC2.0, support class A.QC2.0 supports 5V/9V/ 12V output voltage. QC3.0 supports 5V-12V output voltage, 200mV / step.
Integrated AFC fast charging protocol, output support 5V / 9V/ 12V. The input supports 5V/ 9V voltage.
Integrated FCP fast charging protocol, output support 5V / 9V / 12V. The input supports 5V/9V voltage.
Integrated SCP fast charging protocol, output support 5V@4.5A.Input support 5 5V 3A.
Integrated with PE2.0 and PE1.1 fast charging protocol, PE2.0 supports 5V ~ 12V output voltage, 500mv / step. PE1.1 supports 5V / 7V/ 9V/ 12V output voltage. The input supports 5V/ 9V voltage.
SFCP fast charging protocol is integrated to support 5V /9V / 12V output voltage.
Integrated vooc fast charging protocol, output support 5V 4A
The layout is reasonable. The high current part has been windowed and tinned to reduce the loss and improve the charging and discharging efficiency.
R8 sets the resistance for the battery capacity.
If the later replacement battery capacity difference is not big, you can leave it alone, if the difference is too big, please replace the resistance again
Calculation formula of resistance value:
Resistance value Ω = (Total battery capacity MAH + 2000) *5/3
For example, the resistance of 30000 MAH should be
(30000 + 2000) * 5/3 = 53333 Ω
It can be replaced by a similar resistor, such as 53k.
Attention Points:
1: Motherboard external battery line needs to be able to pass 10A current, at least with more than 1 square copper wire, ordinary wire to use 1.5 square. It's not necessary to be too thick, but it can't be too thin, too thin will have security risks. (because of the high current at the battery end)
2: Motherboard comes with a protection chip, the battery can not add a protection board, if you have, please remove the protection board, directly connect our motherboard cell.(because the built-in current can't be too high, it will be protected as soon as the output power is high.)
3: Use crocodile clip motherboard test, please don't charge mobile phone. If the phone needs to be charged, it must be soldered (many buyers don't listen to it. Whenever there is a problem, they will tell us how the motherboard is broken, how the motherboard can't be charged quickly, how the motherboard can power off and restart, etc. Please operate according to the requirements, thank you for your cooperation)
4: The 4.2V 18650 / polymer / ternary lithium battery can be used as the battery. Large monomer and multiple 18650 can be used in parallel. Iron lithium battery, disposable dry battery, Ni MH battery, lead-acid battery and Ni Cd battery can not be used. Batteries cannot be connected in series. For the first time, there will be inaccurate power display.Please discharge the battery and then fill it up. For the first time, you can continue to charge the battery for more than 5 hours when the 4 lights are all on. There is no need to worry about it.
5: The motherboard must preset the battery capacity, so the approximate battery capacity must be noed or explained to the customer service. Otherwise, the preset battery capacity of the case is 3000OMAH, and that of the single motherboard without the case is 2000OMAH.Or replace the resistor by yourself later.
6: for OPPO flash charging and for Huawei super fast charging are supported. Different protocols have different power. Please understand clearly before shooting. Except that some mobile phones do not support fast charging, others do. (the reason why the mobile phone is not supported is that the mobile phone's own agreement is not open, and the third party can't use it. If you want to use it, you can only go to the official website of each mobile phone to buy it.)
1×Power Supply Module Board
Product Safety Information
Product Safety Information
Manufacturer
Shenzhen Yuner Yipu Trading Co., Ltd
Address
East 1087, Building 4, SEG Science and Technology Park, No. 3012 Huaqiang North Road, Huaqiang North Street, Futian District, Shenzhen, Guangdong, CN
European agent
VISHTEC ltd
Email
compliance@vish-tec.com
Address
3 rd floor office 5, Plovdiv 2 Liuben Karavelov bul, 4002 Bulgaria
UK agent
CET Product Service Ltd.
Email
info@cetproduct.com
Address
Beacon House Stokenchurch Business Park, Ibstone Rd, Stokenchurch, High Wycombe, Buckinghamshire, UK
Setup Guide
1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.
More from Pricio
View all →
Transparent Practice Padlock with 12pcs Unlocking Lock Picks Set Key Extractor Tools
₹2,000
KWS-V20 USB Current Voltage Capacity Tester Volt Current Voltage Detect Charger Capacity Tester Meter Mobile Power Detector
₹2,369
1PC Heavy Duty Soldering Solder Iron Tip Cleaner Steel Wire Soldering Supplies
₹2,000
600LM XPG + 2 LED Bicycle German Standard Smart Sensor Warning Light Bike Front Light Headlight
₹3,422
8.5 x 5.5cm 400 Tie Points 400 Holes Solderless Breadboard Bread Board
₹3,218
6-inch 150mm Electronic Digital Caliper Ruler Carbon Fiber Composite Vernier
₹2,000Related Products
View all →
Bakeey Plant Leaves Printed Curtain For Bathroom Shower Anti-slip Bath Mat Sets Toilet Cover Kitchen Carpet-4-piece Set
₹3,743
Raspberry Pi 5 RGB Low-Profile ICE Tower CPU Cooling Fan Horizontal/Vertical U-shaped Copper Tube Fin Tower
₹3,300
DIY Smart Car Kit Four-Wheel Two-Wheel L298N Driver Module Tracking Bluetooth Capacitive Sensor 4 Channel Relay for Arduino Robotics
₹3,046
Raspberry Pi 5 PCIe to Gigabit Ethernet and USB 3.2 Gen1 HAT 3xUSB 3.2 Gen1 Gigabit Ethernet Pi5 PCIe HAT Expansion Board Plug and Play
₹4,351
ZU60 60W COB Video Dimmable Light 2700-7500K Handheld Photographic LED Light for Photo Studio Film Camera Shooting Live Streaming
₹6,270