Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
OUKITEL P1 1200W 100-240V Wi-Fi 2.4GHz APP Remote Timing WiFi Smart Socket, US Plug(Red) — image 1
Hover to zoom

1 / 5 · Click to enlarge

OUKITEL P1 1200W 100-240V Wi-Fi 2.4GHz APP Remote Timing WiFi Smart Socket, US Plug(Red)

Phone Model
AI Summary
Smart Module for everyday users

The OUKITEL P1 1200W 100-240V Wi-Fi 2.4GHz APP Remote Timing WiFi Smart Socket, US Plug(Red) is a mid-range smart module designed for everyday users. It features One Package Weight: 0.11kgs / 0.25lb and One Package Size: 13cm * 5.8cm * 7.1cm / 5.12inch * 2.28inch * 2.8inch.

₹2,337
Free ShippingIn Stock

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹2,337
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

One Package Weight: 0.11kgs / 0.25lb
One Package Size: 13cm * 5.8cm * 7.1cm / 5.12inch * 2.28inch * 2.8inch
Best Sellers Rank (Consumer Electronics): #4661
Best Sellers Rank (Consumer Electronics > Smart Home): #386
Best Sellers Rank (Consumer Electronics > Smart Home > Smart Socket): #54

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: S-CA9630RCategory: Smart Module

About This Product

The OUKITEL P1 1200W 100-240V Wi-Fi 2.4GHz APP Remote Timing WiFi Smart Socket, US Plug(Red) is a mid-range smart module designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • One Package Weight: 0.11kgs / 0.25lb
  • One Package Size: 13cm * 5.8cm * 7.1cm / 5.12inch * 2.28inch * 2.8inch
  • Best Sellers Rank (Consumer Electronics): #4661
  • Best Sellers Rank (Consumer Electronics > Smart Home): #386
  • Best Sellers Rank (Consumer Electronics > Smart Home > Smart Socket): #54

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

1.Maximum current: 10A, rated voltage: 120V, working temperature: 0 degree celsius - 40 degree celsius, size: 110 x 38 x 51mm, net weight: 85g. 2.WiFi smart socket to make household appliances intelligent. 3.Set the scheduled time to turn on /off any electrical equipment, avoid wasting power and make your life easier. 4.Two US Plug AC output jacks, physical button master control, APP sub-control design, can drive two appliances at the same time, no matter where you are, you can remotely control your home appliances through the network (WIFI/4G) . 5.Support operating system: Android 4.1 / IOS 8.0 version or higher. Instructions: 1.Download and install the Smart Life app, connect the phone to the home WIFI, click the APP icon on the phone to enter the APP interface, click Add Device and select Socket. 2.Connect to the power supply and press and hold the button on the socket until the blue indicator enters the flash mode. 3.Enter the password for the WiFi connected to your mobile phone and click OK to enter the animation page of the search device. 4.According to the botton Time / Switch of the interface, you can do the operation you need.

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.