Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
M5Stack Cap LoRa 1262 for Cardputer Adv LoRaWAN Module SX1262 GPS Antenna 868-923MHz High Precision GNSS Positioning IoT Communication — image 1
Hover to zoom

1 / 7 · Click to enlarge

M5Stack

M5Stack Cap LoRa 1262 for Cardputer Adv LoRaWAN Module SX1262 GPS Antenna 868-923MHz High Precision GNSS Positioning IoT Communication

5.02 ratings
AI Summary
Electronics for everyday users

The M5Stack Cap LoRa 1262 for Cardputer Adv LoRaWAN Module SX1262 GPS Antenna 868-923MHz High Precision GNSS Positioning IoT Communication by M5Stack is a mid-range electronics designed for everyday users.

₹3,063-38%
MRP:₹4,924Save ₹1,861
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

38% Off — you save ₹1,861 on this product!

Type: Board+Antenna

Board+Antenna
Total: ₹3,063
Buying tip: A quality investment for dependable performance and premium build quality.
Estimated delivery: 4 Aug18 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Ideal For

Everyday convenience
Share:
SKU: bg-2047149Category: Electronics

About This Product

The M5Stack Cap LoRa 1262 for Cardputer Adv LoRaWAN Module SX1262 GPS Antenna 868-923MHz High Precision GNSS Positioning IoT Communication by M5Stack is a mid-range electronics designed for everyday users. It delivers reliable performance at an accessible price.

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

Specifications:
LoRa Module: SX1262
Frequency Range: 868–923 MHz
Maximum Data Rate: 300 kbps
LoRa Interface: SPI
LoRa Antenna Dimensions: 108 × 9.3 mm, SMA connector (internal hole), 3 dBi gain
Output Power: +22 dBm
Receiving Sensitivity: -147 dBm (low-rate LoRa mode)
Operating Voltage: DC 5V @ 163.4 mA
Communication Modes: FSK/GFSK/MSK/LoRa/OOK
GPS Module: ATGM336H-6N & AT6668
GPS Interface: UART, default 115200bps@8N1
Satellites Systems Supported: GPS/QZSS/BD2/BD3/GAL/GLO
BDS: B1I + B1C
Frequency Bands: GPS/QZSS/SBAS: L1, GALILEO: E1, GLONASS: R1
Channels: 50 channels
Positioning Accuracy: <1.5 m (CEP50)
Position Update Frequency: Max 10 Hz
Protocol: NMEA 0183 4.1
GPS Sensitivity:
Tracking: -162 dBm
Acquisition: -160 dBm
Cold Start: -148 dBm
Startup Times:
Cold Start: 23 s
Hot Start: 1 s
Power Consumption: 33.1 mA
Product Dimensions: 84.0 × 24.0 × 15.2 mm
Product Weight: 48.6 g

Features:
1.Wide Frequency Compatibility: Operates between 868–923 MHz, suitable for diverse IoT applications in various regions.
2.Enhanced GPS Precision: Provides sub-meter accuracy (<1.5 m) for reliable positioning across multiple satellites systems.
3.High-Power Output: +22 dBm LoRa transmission power ensures extended communication range for tough environments.
4.Modular Antenna Design: SMA connector with 3 dBi gain supports straightforward installation and secure signal transmission.
5.Multi-Satellites System Support: Compatible with GPS/QZSS/BD2/BD3/GAL/GLO systems, ensuring global coverage for tracking and positioning.

Package Included:
1 × Cap LoRa-1262
1 × LoRa Antenna




Product Safety Information

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.