Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
LoRaE5 mini (STM32WLE5JC) — image 1
Hover to zoom

1 / 3 · Click to enlarge

Seeed Studio

LoRaE5 mini (STM32WLE5JC)

23+ bought in past month
AI Summary
LORA Module for everyday users

The LoRaE5 mini (STM32WLE5JC) by Seeed Studio is a mid-range lora module designed for everyday users. It features Model No. / Name: STM32WLE5JC Modules and Voltage Rating: 3.7 to 5.

compact and portable
₹2,919
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹2,919
Buying tip: A quality investment for dependable performance and premium build quality.
Estimated delivery: 22 Aug5 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Model No. / Name: STM32WLE5JC Modules
Voltage Rating: 3.7 to 5
Operating Voltage (V): 3.7V - 5V
Output Voltage: +20.8 dBm at 3.3V
Operating Frequecy: 868/915MHz
Sensitivity (dBm): -106, 116.5 dBm ~ -136 dBm

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-1147637Category: LORA Module

About This Product

The LoRaE5 mini (STM32WLE5JC) by Seeed Studio is a mid-range lora module designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Model No. / Name: STM32WLE5JC Modules
  • Voltage Rating: 3.7 to 5 — works with standard household power
  • Operating Voltage (V): 3.7V - 5V — works with standard household power
  • Output Voltage: +20.8 dBm at 3.3V — works with standard household power
  • Operating Frequecy: 868/915MHz — smooth, flicker-free operation
  • Sensitivity (dBm): -106, 116.5 dBm ~ -136 dBm
  • Modulation Type: LoRa, (G)FSK, (G)MSK, BPSK
  • Operating Temperature (°C): -40℃ ~ 85℃

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

LoRa-E5 mini is a compacted-sized development board suitable for the rapid testing and building of small-size prototyping and helps you design your ideal LoRaWAN wireless IoT device with a long-distance transmission range. LoRa-E5 mini is embedded with LoRa-E5 STM32WLE5JC Module, which delivers the world-first combo of LoRa RF and MCU chip into one single tiny chip and is FCC and CE certified. It is powered by ARM Cortex-M4 core and Semtech SX126X LoRa chip and supports LoRaWAN protocol on the worldwide frequency and (G)FSK, BPSK, (G)MSK, and LoRa modulations.

Pinout:


Features: 

  1. Full GPIOs led out from the Lora-E5 STM32WLE5JC
  2. Global LoRaWAN® and LoRa frequency plan supported
  3. Long-distance transmission range to 10km (ideal value in open area)
  4. Mini and compact size, suitable for rapid testing and building small size prototype
  5. Convenient RESET and BOOT buttons on board
  6. CurrentLoRa-E5 module sleep current as low as 2.1uA (WOR mode)

Package Includes :

1 x LoRaE5 mini (STM32WLE5JC)

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.