Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
LILYGO® Paxcounter/Disaster-Radio LoRa32 V2.1 ESP32 OLED 0.96-inch Bluetooth WiFi Wireless Module SMA Development Board — image 1
Hover to zoom

1 / 8 · Click to enlarge

LILYGO

LILYGO® Paxcounter/Disaster-Radio LoRa32 V2.1 ESP32 OLED 0.96-inch Bluetooth WiFi Wireless Module SMA Development Board

5.011 ratings
AI Summary
Electronics for everyday users

The LILYGO® Paxcounter/Disaster-Radio LoRa32 V2.1 ESP32 OLED 0.96-inch Bluetooth WiFi Wireless Module SMA Development Board by LILYGO is a mid-range electronics designed for everyday users. It features MCU: ESP32 and Flash: 4MB. Customers praise its fast and responsive. 100% of buyers rate it 4★ or above.

fast and responsivewireless convenience
₹2,990
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Price: ₹2,990

Total: ₹2,990
Buying tip: A quality investment for dependable performance and premium build quality.
Estimated delivery: 4 Aug18 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

MCU: ESP32
Flash: 4MB
PSRAM: 8MB
Wireless Connectivity: Wi-Fi 802.11Bluetooth V4.2 + Bluetooth LE
Programming Platform: ArduinoIDE, Micropython
Onboard Functions: TF Card SlotUSB or 3.7V Lipo Battery Power SupplyBattery Switch

Ideal For

Everyday convenience
Share:
SKU: bg-2014835Category: Electronics

About This Product

The LILYGO® Paxcounter/Disaster-Radio LoRa32 V2.1 ESP32 OLED 0.96-inch Bluetooth WiFi Wireless Module SMA Development Board by LILYGO is a mid-range electronics designed for everyday users. Customers highlight its fast and responsive.

Key Specifications

  • MCU: ESP32
  • Flash: 4MB
  • PSRAM: 8MB
  • Wireless Connectivity: Wi-Fi 802.11Bluetooth V4.2 + Bluetooth LE — faster pairing, longer range, and lower battery draw
  • Programming Platform: ArduinoIDE, Micropython
  • Onboard Functions: TF Card SlotUSB or 3.7V Lipo Battery Power SupplyBattery Switch — keeps you powered without frequent recharging
  • Onboard Button: Reset + Boot
  • Type: OLED

Customer Verdict

100% of buyers rated this product 4 stars or above. The most appreciated qualities are: fast and responsive.

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

Feature:


 

 

More information: Github: LILYGO-LoRa-Series-Github Cooperate-Paxcounter-Github Cooperate-Disaster Radio-Official Cooperate-Disaster Radio-Github Cooperate-Disaster Radio V0.2.0-Github Notice: The shipping list does not include battery and SD card. Note: The Meshtastic firmware is not adapted to the TCXO version yet. You can add the below sentences in the source codes to make it work. https://github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series




Or you can ask in the github or community of Meshtastic:



Package includes:


1 X LoRa32 Module 1 X LoRa Antenna 2 X Pin 1 X Power Cable(Jst 2pin 1.25mm)





Product Safety Information

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.