Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
LILYGO® T4-S3 ESP32-S3 2.41-inch AMOLED Touch Display Development Board RGB Screen Dual-Core LX7 Microprocessor WIFI Bluetooth — image 1
Hover to zoom

1 / 3 · Click to enlarge

LILYGO

LILYGO® T4-S3 ESP32-S3 2.41-inch AMOLED Touch Display Development Board RGB Screen Dual-Core LX7 Microprocessor WIFI Bluetooth

23+ bought in past month
AI Summary
IoT Development Boards for premium buyers

The LILYGO® T4-S3 ESP32-S3 2.41-inch AMOLED Touch Display Development Board RGB Screen Dual-Core LX7 Microprocessor WIFI Bluetooth by LILYGO is a premium iot development boards designed for premium buyers. It features MCU Type: ESP32-S3R8 Dual-core LX7 microprocessor and Wireless Functions: 2.4 GHz Wi-Fi & Bluetooth 5 (LE).

wireless convenience
₹10,374
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹10,374
Buying tip: A top-tier option — the best features and quality available in this category.
Estimated delivery: 23 Aug6 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

MCU Type: ESP32-S3R8 Dual-core LX7 microprocessor
Wireless Functions: 2.4 GHz Wi-Fi & Bluetooth 5 (LE)
Flash: 16Mbit
PSRAM: 8MB
Shipping Weight: 0.02 kg
Shipping Dimensions: 7 × 6 × 3 cm

Ideal For

Everyday convenience
Share:
SKU: robu-2088239Category: IoT Development Boards

About This Product

The LILYGO® T4-S3 ESP32-S3 2.41-inch AMOLED Touch Display Development Board RGB Screen Dual-Core LX7 Microprocessor WIFI Bluetooth by LILYGO is a premium iot development boards designed for premium buyers. It delivers reliable performance at an accessible price.

Key Specifications

  • MCU Type: ESP32-S3R8 Dual-core LX7 microprocessor — smooth, lag-free performance
  • Wireless Functions: 2.4 GHz Wi-Fi & Bluetooth 5 (LE) — faster pairing, longer range, and lower battery draw
  • Flash: 16Mbit
  • PSRAM: 8MB
  • Shipping Weight: 0.02 kg
  • Shipping Dimensions: 7 × 6 × 3 cm

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

LILYGO T4-S3 ESP32-S3 2.41-inch AMOLED Touch Display Development Board RGB Screen Dual-Core LX7 Microprocessor WIFI bluetooth Module Board 2.41-inch SPI RGB AMOLED:
  1. Active Area: 36.2*48.96mm
  2. Brightness: 800cd/m
  3. Resolution: 450(W) x RGB x 600(H)
  4. Interface: QSPI

Features:

  1.  Equipped with ESP32-S3R8 chip with a Dual-Core LX7 Microprocessor for a powerful performance.
  2.  Integrated with 2.4 GHz Wi-Fi and bluetooth 5 (LE) capabilities for seamless wireless communication.
  3.  Comes with flexible development platforms including Arduinno, PlatformlO-IDE, Micropython.
  4.  Features a clear 2.41 inch SPI RGB AMOLED screen with QSPI protocol and a bright display.
  5.  Board conveniently features Boot Button, Reset button, and Micro SD slot for an enhanced user experience.

Package Includes:

1 x T4-S3-2.41 Display Module

1 x 1.27mm Female Pin(2*15P)

1 x Battery Cable

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.