Hover to zoom
1 / 8 · Click to enlarge
LILYGO
LILYGO T-Pico-Pro C6 ESP32-C6 Module Raspberry Pi RP2040 Dual MCU Development Board with 2.33 Inch LCD Touch Screen
AI Summary
Electronics for premium buyersThe LILYGO T-Pico-Pro C6 ESP32-C6 Module Raspberry Pi RP2040 Dual MCU Development Board with 2.33 Inch LCD Touch Screen by LILYGO is a premium electronics designed for premium buyers.
₹7,354
Free Shipping💵 COD Available
Available Offers
Free Delivery on this order. No minimum order value.
15-Day Easy Returns — hassle-free return & full refund.
Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.
Type: T-Pico-Pro-C6
T-Pico-Pro-C6
Total: ₹7,354
Buying tip: A quality investment for dependable performance and premium build quality.
Estimated delivery: 4 Aug – 18 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only
Available Offers
💳
5% Cashback
Pay with UPI & get 5% cashback (up to ₹50) via Razorpay
🏦
No-Cost EMI
Available on select bank cards at checkout. 0% interest for 3 months.
📦
Free Shipping
Free delivery on all orders. No minimum order value.
💵
Cash on Delivery
COD available on orders up to ₹5,000 across India.
Ideal For
Everyday convenience
SKU: bg-2044161Category: Electronics
About This Product
The LILYGO T-Pico-Pro C6 ESP32-C6 Module Raspberry Pi RP2040 Dual MCU Development Board with 2.33 Inch LCD Touch Screen by LILYGO is a premium electronics designed for premium buyers. It delivers reliable performance at an accessible price.
Why Buy from Pricio?
Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.
Specifications:
Main Controllers:
MCU1: RP2040 32-bit dual ARM Cortex-M0+; Flash 16MB; SRAM 264KB
MCU2: ESP32-C6 32-bit RISC-V low-power WiFi 6 SOC; Flash 4MB; SRAM 512KB
Connectivity: 2.4 GHz Wi-Fi 6, Bluetooth 5 (LE), IEEE 802.15.4 protocol
Display: 2.33-inch touch IPS TFT LCD; Resolution: 222 (H) RGB x 480 (V); Display Driver: ST7796; Interface: SPI
Sensors: I2C Digital Light Sensor LTR-553ALS-01 with ALS and proximity [PS] capabilities
Storage: Supports SD card expansion
Battery: Onboard 3.8V 470mAh @ 0.2C rechargeable
Input/Output: Capacitive touch display, TF Card slot, boot and run buttons, USB plug modes
Features:
1. Dual-Controller Design
Boasts RP2040 ARM Cortex-M0+ and ESP32-C6 RISC-V SOC for efficient multitasking and reliable performance in complex projects.
2. Enhanced Display Capabilities
Equipped with a 2.33-inch IPS TFT LCD with high-resolution 222 x 480 pixels, delivering vivid visuals and an intuitive touch interface.
3. Advanced Connectivity
Supports the latest wireless protocols: Wi-Fi 6 for high-speed data transfer, and Bluetooth 5 (LE) along with IEEE 802.15.4 for secure, low-power communication.
4. Expansion and Customization Options
Includes SD card support and multiple GPIO pins for increased flexibility in development projects.
5. Integrated Light Sensor
Built-in light and proximity sensor (LTR-553ALS-01) enhances interactive applications and environmental adaptability.
Package Included:
1 x T-Pico-Pro C6 Module
2 x 2.54 mm Pin (13 pins)
2 x 2.54 mm Female Pin (13 pins each)
Product Safety Information
Product Safety Information
Manufacturer
Shenzhen Yuner Yipu Trading Co., Ltd
Address
East 1087, Building 4, SEG Science and Technology Park, No. 3012 Huaqiang North Road, Huaqiang North Street, Futian District, Shenzhen, Guangdong, CN
European agent
VISHTEC ltd
Email
compliance@vish-tec.com
Address
3 rd floor office 5, Plovdiv 2 Liuben Karavelov bul, 4002 Bulgaria
UK agent
CET Product Service Ltd.
Email
info@cetproduct.com
Address
Beacon House Stokenchurch Business Park, Ibstone Rd, Stokenchurch, High Wycombe, Buckinghamshire, UK
Setup Guide
1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.
More from LILYGO
View all →
LILYGO® T-Display-S3 ESP32-S3 1.9 inch ST7789 LCD Display Development Board WIFI Bluetooth5.0 Wireless Module 170*320 Resolution
₹3,359
LILYGO® TTGO T5 WiFi Wireless Module bluetooth Base ESP-32 ESP32 2.13 e-Paper Display Development Board
₹2,375
ESP-32S ESP32 Development Board Wireless WiFi+Bluetooth 2 in 1 Dual Core CPU Low Power Control Board ESP-32S
₹3,837
LILYGO® TTGO LoRa32 868Mhz ESP32 LoRa OLED 0.96 Inch SD Card bluetooth WIFI Wireless Module ESP-32 SMA IP5306
₹4,019
LILYGO® T-Deck ESP32-S3 LoRa Module 2.8 inch LCD Development Board LoRaWAN Long Range 433MHz 868MHz 915MHz with WiFi bluetooth Module Board
₹8,565
LILYGO® TTGO T-Display ESP32 CH9102F WiFi bluetooth Module 1.14 Inch LCD Development Board
₹3,144Related Products
View all →
Bakeey Plant Leaves Printed Curtain For Bathroom Shower Anti-slip Bath Mat Sets Toilet Cover Kitchen Carpet-4-piece Set
₹3,743
Raspberry Pi 5 RGB Low-Profile ICE Tower CPU Cooling Fan Horizontal/Vertical U-shaped Copper Tube Fin Tower
₹3,300
DIY Smart Car Kit Four-Wheel Two-Wheel L298N Driver Module Tracking Bluetooth Capacitive Sensor 4 Channel Relay for Arduino Robotics
₹3,046
Raspberry Pi 5 PCIe to Gigabit Ethernet and USB 3.2 Gen1 HAT 3xUSB 3.2 Gen1 Gigabit Ethernet Pi5 PCIe HAT Expansion Board Plug and Play
₹4,351
ZU60 60W COB Video Dimmable Light 2700-7500K Handheld Photographic LED Light for Photo Studio Film Camera Shooting Live Streaming
₹6,270