I bought this some months back. Anybody has the steps to set this up for Windows with Arduino IDE? So far I have been only able to blink some LEDs. No pin information on the SPI usage. And after some months even Arduino is not detecting it now. I only see this chip id - ESP32-D0WDQ6, but it fails to connect. Is there any way to get this working for displays ST7735 or ILI9488 without a big setup?

I use the Arduino IDE. To make it work, I selected the ESP32C3 Dev Module board. That let me upload the sketch. Don't use the suggestion in the answer to another question here. That board selection is wrong for this product.

Excuse me, do you know how I can select this board in Arduino? I get these:ESP32 Dev Module, ESP32 Wrover Module, ESP32 Pico Kitbut they don't look alike

try ESP32 Arduino > NodeMCU-32S

is this compatible with arduino ise?

When I selected ESP32C3 Dev Module, I got to upload my sketch. Can't figure out the LED, though.

how do i flash this? tried few methods but can not seem to get anything to upload

I use the Arduino IDE. To make it work, I selected the ESP32C3 Dev Module board. That let me upload the sketch._Don use the suggestion in the answer to another question here. That board selection is wrong for this product.

how can i upload a code? i get error below Compilation complete. esptool.py v3.3 Serial port COM3 Connecting...................................... A fatal error occurred: Failed to connect to ESP32-C3: Serial data stream stopped: Possible serial noise or corruption. For troubleshooting steps visit: ***** Upload error: Failed uploading: uploading error: exit status 2

maybe you can contact the customer service.

Do KiCad schematics exist for this board? Would be great if so! Thanks!

Please contact us for more information.

ESP32-C3 Internet of Things Development Board WiFi+5.0 bluetooth Dual-mode Module Wireless Communication Module — image 1

Hover to zoom

1 / 9 · Click to enlarge

Pricio

ESP32-C3 Internet of Things Development Board WiFi+5.0 bluetooth Dual-mode Module Wireless Communication Module

Name: ESP32-C3 Internet of Things Development Board WiFi+5.0 bluetooth Dual-mode Module Wireless Communication Module
Brand: Pricio
SKU: bg-1929148
Price: 2000 INR
Availability: InStock
Rating: 5.0 (53 reviews)

5.053 ratings

AI Summary

Electronics for everyday users

The ESP32-C3 Internet of Things Development Board WiFi+5.0 bluetooth Dual-mode Module Wireless Communication Module by Pricio is a mid-range electronics designed for everyday users. Customers praise its great value for money and accurate and reliable. 100% of buyers rate it 4★ or above.

✓ great value for money✓ accurate and reliable✓ wireless convenience

₹2,000

Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Quantity

Total: ₹2,000

Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.

Estimated delivery: 4 Aug – 18 Aug

Check delivery date

Free Shipping

Pan India delivery

15-Day Returns

Hassle-free policy

Secure Payment

Razorpay protected

Quality Assured

Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Ideal For

Everyday convenience

SKU: bg-1929148Category: Electronics

About This Product

The ESP32-C3 Internet of Things Development Board WiFi+5.0 bluetooth Dual-mode Module Wireless Communication Module by Pricio is a mid-range electronics designed for everyday users. Customers highlight its great value for money and accurate and reliable.

Customer Verdict

100% of buyers rated this product 4 stars or above. The most appreciated qualities are: great value for money, accurate and reliable.

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

MCU:

• Built-in ESP32-C3FH4 or ESP32-C3FN4 chip, RISC-V 32-bit single-core microprocessor, the maximum frequency is 160MHz

• 4MB embedded flash

• 384KBROM

• 400KB SRAM (of which 16KB is dedicated to cache)

• 8KBRTCSRAM

WiFi:

• Support IEEE802.11b/g/n protocol

• Working channel center frequency range: 2412~2484MHz

• Supports 20MHz and 40MHz bandwidth in the 2.4GHz frequency band

• Support 1T1R mode, data rate up to 150Mbps

• Wireless Multimedia (WMM)

• Frame aggregation (TX/RXA-MPDU, TX/RXA-MSDU)

• Immediate Block ACK (ImmediateBlockACK)

• Fragmentation and reorganization (Fragmentationanddefragmentation)

• Transmission opportunity (Transmissionopportunity, TXOP)

• Beacon automatic monitoring (hardware TSF)

• 4 × virtual Wi-Fi interface

• Support infrastructure network (InfrastructureBSS) Station mode, SoftAP mode, Station+SoftAP mode and promiscuous mode at the same time. Please note that when the ESP32-C3 series scans in Station mode, the SoftAP channel will change at the same time

• Antenna diversity

• 802.11mcFTM

Bluetooth:

• Bluetooth Low Energy (BluetoothLE): Bluetooth5, Bluetoothmesh

• Rate support 125Kbps, 500Kbps, 1Mbps, 2Mbps

• Broadcast Extensions (AdvertisingExtensions)

• Multiple Advertisement (MultipleAdvertisementSets)

• Channel Selection (ChannelSelectionAlgorithm#2)

Hardware:

• Module interface: GPIO, SPI, UART, I2C, I2S, infrared remote control (remotecontrolperipheral), LEDPWM controller, general DMA controller, TWAI® controller (compatible with ISO11898-1), USB serial port/JTAG controller, temperature sensor , SAR A/D converter

• 40MHz integrated crystal oscillator

• Working environment temperature: –85°C version module: –40~85°C–105°C version module: -40~105°C

Package incldued:

1 x ESP-C3-12F-Kit Series Development Board

ESP32-C3 Internet of Things Development Board WiFi+5.0 bluetooth Dual-mode Module Wireless Communication Module

Product Safety Information

Setup Guide

Identify the pins

Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.

Wire to your microcontroller

Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.

Install libraries

In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.

Upload example sketch

Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.

Calibrate if needed

Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.

ESP32-C3 Internet of Things Development Board WiFi+5.0 bluetooth Dual-mode Module Wireless Communication Module

About This Product

Customer Verdict

Why Buy from Pricio?

Setup Guide

More from Pricio

Transparent Practice Padlock with 12pcs Unlocking Lock Picks Set Key Extractor Tools

KWS-V20 USB Current Voltage Capacity Tester Volt Current Voltage Detect Charger Capacity Tester Meter Mobile Power Detector

1PC Heavy Duty Soldering Solder Iron Tip Cleaner Steel Wire Soldering Supplies

600LM XPG + 2 LED Bicycle German Standard Smart Sensor Warning Light Bike Front Light Headlight

8.5 x 5.5cm 400 Tie Points 400 Holes Solderless Breadboard Bread Board

6-inch 150mm Electronic Digital Caliper Ruler Carbon Fiber Composite Vernier

Related Products

Bakeey Plant Leaves Printed Curtain For Bathroom Shower Anti-slip Bath Mat Sets Toilet Cover Kitchen Carpet-4-piece Set

Raspberry Pi 5 RGB Low-Profile ICE Tower CPU Cooling Fan Horizontal/Vertical U-shaped Copper Tube Fin Tower

DIY Smart Car Kit Four-Wheel Two-Wheel L298N Driver Module Tracking Bluetooth Capacitive Sensor 4 Channel Relay for Arduino Robotics

Raspberry Pi 5 PCIe to Gigabit Ethernet and USB 3.2 Gen1 HAT 3xUSB 3.2 Gen1 Gigabit Ethernet Pi5 PCIe HAT Expansion Board Plug and Play

ZU60 60W COB Video Dimmable Light 2700-7500K Handheld Photographic LED Light for Photo Studio Film Camera Shooting Live Streaming

Tuya WIFI Smart Gas Valve Controller Garden Water Shut Off Timer Irrigation Controller with Alexa Google Assistant SmartLife