Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
SEA DN32 Water Flow Sensor Flowmeter 3.5-24V 1.25'' 1-120L/Min — image 1
Hover to zoom

1 / 10 · Click to enlarge

sea

SEA DN32 Water Flow Sensor Flowmeter 3.5-24V 1.25'' 1-120L/Min

3.01 rating
252+ bought in past month
AI Summary
Flow Sensors for everyday users

The SEA DN32 Water Flow Sensor Flowmeter 3.5-24V 1.25'' 1-120L/Min by sea is a mid-range flow sensors designed for everyday users. It features Model No. / Name: Water Flow Sensor and Max Water Flow(L/min): 1 to 120.

₹2,141
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹2,141
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Model No. / Name: Water Flow Sensor
Max Water Flow(L/min): 1 to 120
Working water pressure(MPa): ≤2.0
Material: ABS, metal
Color: Black
Length (mm): 120

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-1031148Category: Flow Sensors

About This Product

The SEA DN32 Water Flow Sensor Flowmeter 3.5-24V 1.25'' 1-120L/Min by sea is a mid-range flow sensors designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Model No. / Name: Water Flow Sensor
  • Max Water Flow(L/min): 1 to 120
  • Working water pressure(MPa): ≤2.0
  • Material: ABS, metal — built to last with a quality finish
  • Color: Black
  • Length (mm): 120
  • Width (mm): 50
  • Weight (g): 190

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

This DN32 Water Flow Sensor Flowmeter 3.5-24V 1.25'' 1- 120L/Min  consists of a plastic valve body, a water rotor, and a hall-effect sensor. When water flows through the rotor, the rotor rolls. Its speed changes with different rates of flow. The hall-effect sensor outputs the corresponding pulse signal. This one is suitable to detect flow in water dispensers or coffee machines. We have a comprehensive range of water flow sensors in different diameters. Check them out to find the one that meets your need most.

Features:

  1. Made of high-quality ABS and metal, it is solid, durable, and good performance, serve you for a long time.
  2. With stainless steel bearing inside the impeller, supper wear-resistant.
  3. The sealing ring adopts the structure under the upper and lower forces to never leak water.
  4. A permanent magnet will never rust.
  5. Prevent water ingress and never age.
  6. Great for irrigation, chemical industry, waterworks, and so on.
  7. Water flow sensor only, other accessories demo in the picture is not included!

Package Includes:

1 x DN32 Water Flow Sensor Flowmeter 3.5-12V 1.25'' 1- 120L/Min

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.