Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
Digilent Pmod GYRO 3-Axis Digital Gyroscope Module — image 1
Hover to zoom

1 / 2 · Click to enlarge

Digilent

Digilent Pmod GYRO 3-Axis Digital Gyroscope Module

28+ bought in past month
AI Summary
IMU, Accelerometer, Magnetometer and Gyroscope for everyday users

The Digilent Pmod GYRO 3-Axis Digital Gyroscope Module by Digilent is a mid-range imu, accelerometer, magnetometer and gyroscope designed for everyday users. It features Item Type: Gyroscope and Gyroscope: 3-axis MEMS digital.

₹3,229
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹3,229
Buying tip: A quality investment for dependable performance and premium build quality.
Estimated delivery: 23 Aug6 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: Gyroscope
Gyroscope: 3-axis MEMS digital
PCB Size ( L x W ) mm: 1.0 in × 0.8 in (2.5 cm × 2.0 cm)
Pmod connector: 12-pin
Shipping Weight: 0.007 kg
Shipping Dimensions: 10 × 8 × 2 cm

Ideal For

Everyday convenience
Share:

About This Product

The Digilent Pmod GYRO 3-Axis Digital Gyroscope Module by Digilent is a mid-range imu, accelerometer, magnetometer and gyroscope designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Item Type: Gyroscope
  • Gyroscope: 3-axis MEMS digital
  • PCB Size ( L x W ) mm: 1.0 in × 0.8 in (2.5 cm × 2.0 cm)
  • Pmod connector: 12-pin — compatible with modern devices
  • Shipping Weight: 0.007 kg
  • Shipping Dimensions: 10 × 8 × 2 cm

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

The Pmod GYRO is a 3-axis gyroscope powered by the ST Microelectronics L3G4200D. By communicating with the chip through SPI or I2C, users may configure the module to report angular momentum at a resolution of up to 2000 dps at an output rate up to 800Hz. Note: For more technical Details go through Datasheet in the attachment section 

Features:

  1. 3-axis MEMS digital gyroscope with high shock survivability
  2. Get angular velocity data with user selectable resolution (250/500/2000dps)
  3. Two customizable interrupt pins
  4. User configurable signal filtering
  5. Power-down and Sleep modes
  6. Small PCB size for flexible designs 1.0 in × 0.8 in (2.5 cm × 2.0 cm)
  7. 12-pin Pmod connector with SPI interface and additional I²C interface
  8. Library and example code available in resource center

Package Includes:

1 x Digilent Pmod GYRO: 3-axis Digital Gyroscope

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.