Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
DFRobot Gravity Analog Voltage Divider V2 — image 1
Hover to zoom

1 / 4 · Click to enlarge

DFRobot

DFRobot Gravity Analog Voltage Divider V2

36+ bought in past month
AI Summary
DF Robot Modules for everyday users

The DFRobot Gravity Analog Voltage Divider V2 by DFRobot is a value-for-money df robot modules designed for everyday users. It features Operating Voltage (V): 25 and Interface: Analog.

₹869
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹869
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Operating Voltage (V): 25
Interface: Analog
Length (mm): 30
Width (mm): 22
Shipping Weight: 0.015 kg
Shipping Dimensions: 6 × 6 × 3 cm

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-2071572Category: DF Robot Modules

About This Product

The DFRobot Gravity Analog Voltage Divider V2 by DFRobot is a value-for-money df robot modules designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Operating Voltage (V): 25 — works with standard household power
  • Interface: Analog — compatible with modern devices
  • Length (mm): 30
  • Width (mm): 22
  • Shipping Weight: 0.015 kg
  • Shipping Dimensions: 6 × 6 × 3 cm

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

The Analog Voltage Divider V2 can detect the supply voltage from 0.0245V to 25V. This module is based on resistor divider principle. The voltage detection module allows the input voltage to reduce 5 times. As the Arduino analog input voltage is normally maximum 5V, the input voltage of analog voltage detection module can not exceed 5Vx5 which is 25V.

Notice: The new version of analog sensor port pin mapping has been changed as the following two features.

Features:

  1. Wide voltage range from 3.3V to 5V
  2. Standard assembling struct (two 3mm holes with multiple of 5cm as interval)
  3. Easily recognitive interfaces of sensors ("A" for analog and "D" for digital)
  4. Icons to simplely illustrate sensor function
  5. High quality connector
  6. Immersion gold surface

Package Includes:

1 x DFRobot Gravity: Analog Voltage Divider V2

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.