Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
DFRobot Fermion HR8833 Mini DC Motor Driver 2×1.5A — image 1
Hover to zoom

1 / 3 · Click to enlarge

DFRobot

DFRobot Fermion HR8833 Mini DC Motor Driver 2×1.5A

33+ bought in past month
AI Summary
DF Robot Modules for everyday users

The DFRobot Fermion HR8833 Mini DC Motor Driver 2×1.5A by DFRobot is a value-for-money df robot modules designed for everyday users. It features Item Type: Accessory and Length (mm): 18.

compact and portable
₹1,034
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,034
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 18 Aug1 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: Accessory
Length (mm): 18
Width (mm): 13
Bluetooth Version: Supports Bluetooth 5.1 dual mode function
Shipping Weight: 0.015 kg
Shipping Dimensions: 9 × 7 × 3 cm

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-2071666Category: DF Robot Modules

About This Product

The DFRobot Fermion HR8833 Mini DC Motor Driver 2×1.5A by DFRobot is a value-for-money df robot modules designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Item Type: Accessory
  • Length (mm): 18
  • Width (mm): 13
  • Bluetooth Version: Supports Bluetooth 5.1 dual mode function — faster pairing, longer range, and lower battery draw
  • Shipping Weight: 0.015 kg
  • Shipping Dimensions: 9 × 7 × 3 cm

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

This is a ultra compact size Dual-H-Bridge dc motor driver (Based on HR8833), which could drive two way 1.5A DC brush motors up to 10V . It has the same footprint as your thumbnail suitable for projects with limited spaces.

Useful link:

For more information refer to the tutorial.

Features:

  1. Logic Input Voltage (VCC): 3.3-5V
  2. Load Supply Voltage (VM): 3.3-10V
  3. Maximum Continuous Operating Current: 1500mA( Single)
  4. Support PWM speed control mode
  5. Maximum power dissipation: 25W (T = 75 degree Celsius)
  6. Working temperature:-20~85℃
  7. Module Size: 18* 13mm/0.7*0.5 inches

Package Includes:

1 x Dual 1.5A Motor Driver - HR8833

2 x 6 Pin XH-2.54 standard pin

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.