Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
COMUS Tilt Switch, 15 °, 60 Vac, 0.25 A, Nickel — image 1
Hover to zoom

1 / 2 · Click to enlarge

COMUS Tilt Switch, 15 °, 60 Vac, 0.25 A, Nickel

36+ bought in past month
AI Summary
Vibration/Tilt Sensor and Modules for everyday users

The COMUS Tilt Switch, 15 °, 60 Vac, 0.25 A, Nickel is a value-for-money vibration/tilt sensor and modules designed for everyday users. It features Model No. / Name: Tilt Sensor Module and Length (mm): 22.

₹839
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹839
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Model No. / Name: Tilt Sensor Module
Length (mm): 22
Width (mm): 5
Weight (g): 1 each
Contact Capacity: 60 V MAX, 0.25 A MAX, 3 VA MAX
Contact Resistance (ohm): 30 Ω MAX Measured 10° Below Horizontal at 5 VDC

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-1373855Category: Vibration/Tilt Sensor and Modules

About This Product

The COMUS Tilt Switch, 15 °, 60 Vac, 0.25 A, Nickel is a value-for-money vibration/tilt sensor and modules designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Model No. / Name: Tilt Sensor Module
  • Length (mm): 22
  • Width (mm): 5
  • Weight (g): 1 each
  • Contact Capacity: 60 V MAX, 0.25 A MAX, 3 VA MAX
  • Contact Resistance (ohm): 30 Ω MAX Measured 10° Below Horizontal at 5 VDC
  • Angle (FOV): Make angle: 10° MAX Below Horizontal, Break Angle: 10° MAX Above Horizontal, Differential Angle: 15° MAX
  • Operating Temperature (°C): -37° to 100°C

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

The CW1300-1 from Comus is a nonmercury tilt sensor. These operate when tilted from the horizontal position. The switch movement required to cause contact change is called the differential angle. It is very important when designing a tilt switch to allow the differential angle and understand that when in the horizontal position the switch contact may be open or closed.


Features:

  1. Resistant to Ambient Environmental Conditions
  2. Case Material Tin Plated
  3. Hermetically Sealed & Inert Gas Filled
  4. Customization Available

Package Includes:

1 x COMUS Tilt Switch, 15 °, 60 Vac, 0.25 A, Nickel

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.