Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
Arducam 8MP IMX219 NOIR V2 Night Vision Camera Module for Raspberry Pi — image 1
Hover to zoom

1 / 2 · Click to enlarge

Arducam

Arducam 8MP IMX219 NOIR V2 Night Vision Camera Module for Raspberry Pi

22+ bought in past month
AI Summary
Arducam Cameras and Accessories for everyday users

The Arducam 8MP IMX219 NOIR V2 Night Vision Camera Module for Raspberry Pi by Arducam is a mid-range arducam cameras and accessories designed for everyday users. It features Image Sensor: IMX219 and Still Resolution: 8 Megapixels.

₹2,283
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹2,283
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Image Sensor: IMX219
Still Resolution: 8 Megapixels
Sensor Resolution: 3280 × 2464 pixels
Pixel Size (um): 1.12 µm x 1.12 µm
Optical Size: 1/4"
IR Sensitivity: without IR-cut filter, sensitive to IR light

Ideal For

Photography and videographySecurity monitoringLive streaming
Share:
SKU: robu-2194536Category: Arducam Cameras and Accessories

About This Product

The Arducam 8MP IMX219 NOIR V2 Night Vision Camera Module for Raspberry Pi by Arducam is a mid-range arducam cameras and accessories designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Image Sensor: IMX219
  • Still Resolution: 8 Megapixels
  • Sensor Resolution: 3280 × 2464 pixels
  • Pixel Size (um): 1.12 µm x 1.12 µm
  • Optical Size: 1/4"
  • IR Sensitivity: without IR-cut filter, sensitive to IR light
  • Shipping Weight: 0.005 kg
  • Shipping Dimensions: 6 × 5 × 2 cm

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

This IR-sensitive Raspberry Pi camera module uses the Sony IMX219 8-megapixel sensor, which gives you all the specifications offered by the regular V2 camera module, but with one difference: it does not work with IR filters (NoIR = no IR filter.). This means that your photos taken during the day will look very reddish, but it allows you to see normal scenes in the dark through infrared light.The Pi NoIR is very popular among wildlife enthusiasts: with a few infrared LEDs, you can monitor the activities of nocturnal animals in your garden without disturbing them. You can also use it to monitor the health of your green plants at night. You don’t need to keep an eye on your plants at all times, just use the camera to record them.


Features:

  1. More Than HD: This camera adopts a 1/4” 8MP IMX219 sensor for sharp image
  2. Higher Resolution: Max. still resolution is 3280 x 2464 pixels
  3. NoIR: It is greatly useful to your various night projects

Package Include:

1pcs camera board with IMX219 NoIR Sensor 1pcs 15cm 15-22pin FPC cable 1pcs 15cm 22-22pin FPC cable

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.