Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
ASAIR AOF1010 Ultrasonic Oxygen Sensor — image 1
Hover to zoom

1 / 2 · Click to enlarge

ASAIR

ASAIR AOF1010 Ultrasonic Oxygen Sensor

5.01 rating
564+ bought in past month
AI Summary
Gas Sensors for everyday users

The ASAIR AOF1010 Ultrasonic Oxygen Sensor by ASAIR is a value-for-money gas sensors designed for everyday users. It features Item Type: Oxygen Sensor and Model No. / Name: AOF1010.

₹1,389
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,389
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: Oxygen Sensor
Model No. / Name: AOF1010
Operating Voltage (V): 5
Preheat time: 10s
Additional Specs.: Concentration range: 21%~95.6%, Concentration accuracy: ±1.8%
Flow Range: 0~10L/min

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-1517214Category: Gas Sensors

About This Product

The ASAIR AOF1010 Ultrasonic Oxygen Sensor by ASAIR is a value-for-money gas sensors designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Item Type: Oxygen Sensor
  • Model No. / Name: AOF1010
  • Operating Voltage (V): 5 — works with standard household power
  • Preheat time: 10s
  • Additional Specs.: Concentration range: 21%~95.6%, Concentration accuracy: ±1.8% — reliable connection even at a distance
  • Flow Range: 0~10L/min — reliable connection even at a distance
  • Flow resolution (L/min): 0.1L/min
  • Flow accuracy (L/min): ±0.2L/min

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

AOF1010 ultrasonic oxygen sensor is an ideal economic and practical oxygen concentration detection module based on the ultrasonic principle. It has advantages such as high precision, cost-effectiveness, high reliability, and simplicity to use. Besides, it can measure concentration, flow, and temperature simultaneously. It can be widely used in agriculture, industry, commerce, and environmental testing, especially in the oxygen generator industry.

Applications:

AOF1010 can accurately measure the concentration and flow rate of Oxygen. It can be widely used in medical treatment, health care, the chemical industry, mining, food, and other industries.

Note: Actual product may vary in terms of the version printed on it.

Features:

  1. Ultrasonic principle
  2. High precision and long service life
  3. Strong anti-interference ability
  4. Detect concentration and flow rate simultaneously
  5. Small size, easy to install, and simple to use
  6. No verification needed

Packages Include:

1 xASAIR AOF1010 Ultrasonic Oxygen Sensor

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.