Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
AD7606 Data Acquisition Module 16-bit ADC 8-way synchronous sampling frequency 200KHz — image 1
Hover to zoom

1 / 4 · Click to enlarge

AD7606 Data Acquisition Module 16-bit ADC 8-way synchronous sampling frequency 200KHz

31+ bought in past month
AI Summary
Breakout Board for everyday users

The AD7606 Data Acquisition Module 16-bit ADC 8-way synchronous sampling frequency 200KHz is a mid-range breakout board designed for everyday users. It features Item Type: Data Acquisition Module and Model No. / Name: AD7606.

₹1,992
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,992
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: Data Acquisition Module
Model No. / Name: AD7606
Based On: AD7606 16-bit ADC Chip
Compatibility: Arduino, STM32, DSP, Raspberry Pi, FPGA
Resolution: 16-bit
Channels: 8

Ideal For

Everyday convenience
Share:
SKU: robu-3001910Category: Breakout Board

About This Product

The AD7606 Data Acquisition Module 16-bit ADC 8-way synchronous sampling frequency 200KHz is a mid-range breakout board designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Item Type: Data Acquisition Module
  • Model No. / Name: AD7606
  • Based On: AD7606 16-bit ADC Chip
  • Compatibility: Arduino, STM32, DSP, Raspberry Pi, FPGA
  • Resolution: 16-bit
  • Channels: 8
  • Sampling frequency(Hz): 200Ksps — smooth, flicker-free operation
  • Impedance (Ω): 1MΩ

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

The AD7606 Data Acquisition Module is a high-performance 16-bit ADC designed for multi-channel precision measurement systems. It offers 8 simultaneously sampled analog inputs with a wide input range of ±5V or ±10V, controlled via IO pins. With a maximum sampling rate of 200Ksps and built-in oversampling options, it effectively minimizes noise and enhances accuracy. This module supports 16-bit parallel interfaces, making it compatible with both 3.3V and 5V logic systems. Perfect for industrial control, data logging, and sensor signal acquisition, the AD7606 ensures stable and reliable data performance under single 5V power operation.


Features:

  1. Uses AD7606 16-bit high-precision ADC chip.
  2. 8 synchronous analog input channels.
  3. Input range selectable: ±5V or ±10V.
  4. High sampling rate up to 200Ksps.
  5. 8-level oversampling to reduce noise.
  6. Supports 16-bit parallel interfaces.
  7. Single 5V power supply operation.
  8. Compatible with 3.3V/5V IO logic levels.

Package Includes:

1 x AD7606 Data Acquisition Module 16-bit ADC 8-way synchronous sampling frequency 200KHz

1 x Accessory Set

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.