Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
5Pcs USB Lithium Battery Charger Module Board with Charging and Protection Integration Board — image 1
Hover to zoom

1 / 5 · Click to enlarge

Pricio

5Pcs USB Lithium Battery Charger Module Board with Charging and Protection Integration Board

5.01 rating
AI Summary
Electronics for everyday users

The 5Pcs USB Lithium Battery Charger Module Board with Charging and Protection Integration Board by Pricio is a mid-range electronics designed for everyday users.

₹2,000
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹2,000
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 4 Aug18 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Ideal For

Everyday convenience
Share:
SKU: bg-2010439Category: Electronics

About This Product

The 5Pcs USB Lithium Battery Charger Module Board with Charging and Protection Integration Board by Pricio is a mid-range electronics designed for everyday users. It delivers reliable performance at an accessible price.

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

Features:
Input port with micro USB female, can directly use mobile charger for input to the lithium battery, and still retain the input voltage wiring solder joints, can be very convenient.
Connect the battery to B + B -, insert mobile phone charger to the USB Female then red light is charging and green is fully charged.

Specification:
Input voltage: 5V
Maximum charging current: 1000 mA
Charge cut-off voltage: 4.2 V + / - 1%
Battery overcharge protection voltage: 2.5 V
Battery over-current protection current: 3 A
Input interface: Micro USB
Dimension: 2.6 x 1.7 cm

Package includes:
5x Charger module board


Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.