450W 20A H Bridge DC Motor Speed Controller Driver Module DC12-36V PWM Level Motor Control Switch Forward Reverse Brake

Specifications:
Product Name: 450W 20A H Bridge DC Motor Speed Controller Driver Module
Applicable Range: Large power DC motor drive, Widely used in large cars, robots, etc.
Drive Voltage: DC 11-36V input direct current voltage (NO alternating current input)
Output Current: Rated continuous output 24V at 15A, 360W with no need for radiator, max 36V 15A 450W
Output Power: Natural cooling rating at 450W when supplied 36V 15A
Working Temperature: Industrial-grade (-40°C to +85°C).
Weight: 293g

Features:
1. Versatile Control: The driver module allows for three-line control adjustments for speed, direction, and braking.
2. Wide Voltage Support: It supports a voltage ranging from 10-36V and has an undervoltage protection feature.
3. High Load Capacity: It can continuously load current of up to 20A (with a simple radiator attached) and can handle peak currents of up to 110A for short periods.
4. Small and Compact: The driver module has a small footprint of only 6.6cm x 3.8cm while only reaching a total height of 2.8cm with a 1cm thick radiator attached.
5. Easy Integration: It can be directly integrated with a PLC or 3.3V to 5V single-chip microcomputer IO ports and has a built-in interface level buffer feature.

Product use: En: enable power Pwml1: Positive rotation control Pwml2: reverse control GND: Power Bad Output end: VIN+: Driven Power Power Supply Input Active 10V-36V GND: Drive Board power supply input negative M+: connecting motor wires M-: Electric wire wire The following is the instructions for the use of two control methods: Level control method: En = 0 pwml1 = 0 pwml2 = 1 motor is rotating En = 0 pwml1 = 1 pwml2 = 0 motor reversal En = 0 pwml1 = 1 pwml2 = 1 motor brake En = 1 pwml1 = 1 pwml2 = 1 motor free PWM control method: En = 0 pwml1 = duty -occupying ratio PWM signal PWML2 = 1 motor is rotating (the speed adjustment can be adjusted) EN = 0 PWML1 = 1 PWML2 = The duty -occupying ratio can be adjusted PWM signal motor reversal (the speed adjustment can be adjusted) En = 0 pwml1 = 1 pwml2 = 1 motor brake En = 1 pwml1 = 1 pwml2 = 1 motor free 

Package Includes:
1x Module Board