Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
25x25x8mm 28db High Gain 5cm Length Built-in Ceramic Active GPS Antenna for NEO-6M NEO-7M NEO-8M — image 1
Hover to zoom

1 / 2 · Click to enlarge

25x25x8mm 28db High Gain 5cm Length Built-in Ceramic Active GPS Antenna for NEO-6M NEO-7M NEO-8M

4.02 ratings
578+ bought in past month
AI Summary
Drone GPS GNSS Modules and Antennas for everyday users

The 25x25x8mm 28db High Gain 5cm Length Built-in Ceramic Active GPS Antenna for NEO-6M NEO-7M NEO-8M is a value-for-money drone gps gnss modules and antennas designed for everyday users. It features Item Type: GPS Antenna and Frequency: 1575.42MHz ± 4 MHz. Customers praise its accurate and reliable.

accurate and reliable
₹614
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹614
Buying tip: A smart budget buy — solid performance without breaking the bank.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: GPS Antenna
Frequency: 1575.42MHz ± 4 MHz
Voltage standing wave ratio: 1.5
Polarization: right-hand circular polarization
Antenna Gain: 28dB
Noise (dB): 1.5dB

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-1150670Category: Drone GPS GNSS Modules and Antennas

About This Product

The 25x25x8mm 28db High Gain 5cm Length Built-in Ceramic Active GPS Antenna for NEO-6M NEO-7M NEO-8M is a value-for-money drone gps gnss modules and antennas designed for everyday users. Customers highlight its accurate and reliable.

Key Specifications

  • Item Type: GPS Antenna
  • Frequency: 1575.42MHz ± 4 MHz — smooth, flicker-free operation
  • Voltage standing wave ratio: 1.5 — works with standard household power
  • Polarization: right-hand circular polarization
  • Antenna Gain: 28dB
  • Noise (dB): 1.5dB
  • Interference suppression: 30dB ± 100MHz — smooth, flicker-free operation
  • Operating Temperature (°C): -45 ~ +85

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

This is 25x25x8mm 28db High Gain 5cm Length Built-in Ceramic Active GPS Antenna for NEO-6M NEO-7M NEO-8M. This ceramic antenna cable with a UFL interface is used for GPS, especially for marine navigation. Super durability and pressure resistance. High quality and great connectivity.

Features: 

  1. This ceramic antenna cable with a UFL interface is used for GPS especially for marine navigation.
  2. Super durability and pressure resistance. High Gain Ceramic GPS Antenna with High quality and great connectivity.
  3. Built-in Active Antenna with great connectivity.
  4. Easy to install, High-gain antenna for GPS.
  5. This antenna is great for timing, marine navigation.

Package Includes:

1 x Ceramic Active GPS Antenna

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.

Frequently Bought Together