Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
20mm 2.4MHz Piezoelectric Humidifier Energy Conversion Plate — image 1
Hover to zoom

20mm 2.4MHz Piezoelectric Humidifier Energy Conversion Plate

32+ bought in past month
AI Summary
Ultrasonic Humidifier Module for everyday users

The 20mm 2.4MHz Piezoelectric Humidifier Energy Conversion Plate is a value-for-money ultrasonic humidifier module designed for everyday users. It features Operating Frequency (MHz): 2.4 and Load Capacitance(pF): 2200pF.

₹583
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹583
Buying tip: A smart budget buy — solid performance without breaking the bank.
Estimated delivery: 17 Aug31 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Operating Frequency (MHz): 2.4
Load Capacitance(pF): 2200pF
Load Resonance Resistor: 350Ω
Excitation Level: 250mW
Operating Temperature (°C): Reference Temp. 26℃
Insertion Loss: 3dB

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-815786Category: Ultrasonic Humidifier Module

About This Product

The 20mm 2.4MHz Piezoelectric Humidifier Energy Conversion Plate is a value-for-money ultrasonic humidifier module designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Operating Frequency (MHz): 2.4 — smooth, flicker-free operation
  • Load Capacitance(pF): 2200pF
  • Load Resonance Resistor: 350Ω
  • Excitation Level: 250mW
  • Operating Temperature (°C): Reference Temp. 26℃
  • Insertion Loss: 3dB
  • Diameter (mm): Atomizer: 2cm/0.79in; Sealing ring: 2.5cm/0.98in
  • Shipping Weight: 0.005 kg

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

This Piezoelectric Humidifier is made of high-quality material, durable, anti-corrosion, anti-aging, and high hardness, great effect, and serve you for a long time.
With electronic high-frequency oscillation ( 2.4MHz), the liquid water molecules are processed into flowing mist and release a large number of negative ions, which react with smoke, dust, and the like floating in the air to cause precipitation.
It also can effectively remove harmful substances such as formaldehyde, carbon monoxide, and bacteria, so that the air can be purified and the disease can be reduced, keep your and your family's health.
Low impedance, waveform is stable, high electromechanical conversion efficiency and low dielectric loss, this atomizer saves more energy than heated atomization.
Suitable for industry, warehousing, family, hotel, and so on.

Features:

  1. Made From High-Quality Materials.
  2. Electronic High-Frequency Oscillations.
  3. It also can effectively remove harmful substances such as formaldehyde, carbon monoxide and bacteria.

Package Includes:

1 x 20mm 2.4mhz piezoelectric humidifier, energy conversion plate

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.