Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
20KV High Frequency High Voltage Transformer Epoxy Resin Coil Ozone Generator Air Purification Negative Ion Producer 23KHz-130KHz High Efficiency — image 1
Hover to zoom
Pricio

20KV High Frequency High Voltage Transformer Epoxy Resin Coil Ozone Generator Air Purification Negative Ion Producer 23KHz-130KHz High Efficiency

AI Summary
ZVS Heating Module for everyday users

The 20KV High Frequency High Voltage Transformer Epoxy Resin Coil Ozone Generator Air Purification Negative Ion Producer 23KHz-130KHz High Efficiency by Pricio is a mid-range zvs heating module designed for everyday users.

₹2,000
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹2,000
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 4 Aug18 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: bg-2044970Category: ZVS Heating Module

About This Product

The 20KV High Frequency High Voltage Transformer Epoxy Resin Coil Ozone Generator Air Purification Negative Ion Producer 23KHz-130KHz High Efficiency by Pricio is a mid-range zvs heating module designed for everyday users. It delivers reliable performance at an accessible price.

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

Specifications:
Product Function: High-voltage step-up transformer
Max Voltage Resistance: 30KV (recommended usage under 20KV)
Turns Ratio: 5:900
Frequency Range: 23KHz–130KHz
Primary Wire Diameter: 1mm
Secondary Wire Diameter: 0.16mm
Resistance: 43Ω
Continuous Power: 100W
Peak Power: 200W
Encapsulation Type: Epoxy resin hard coating
Product Dimensions: 45.5 x 48mm

Features:
1. High-output voltage: Delivers stable high voltage up to 20KV, ideal for applications such as ignition systems, ozone generation, air purification, and high-energy electric fields.
2. Energy-efficient design: Adopts advanced high-frequency transformer technology for efficient power conversion, minimizing energy waste while optimizing performance in compact spaces.
3. Enhanced structural integrity: Built with premium insulation materials and carefully constructed to ensure reliable operation in high-voltage environments, offering longevity with minimal maintenance.
4. Purification capability: Designed for the efficient production of ozone and negative ions to reduce contaminants, eliminate odors, and improve indoor air quality.
5. Diverse applications: Suitable for a variety of systems, including ozone generators, exhaust purification devices, automotive ignition upgrades, and other high-voltage-dependent systems.

Package Included:
1 x High-voltage Step-up Transformer

Instructions for Use:
This high-voltage transformer must be used with a driver board and cannot be directly powered! It is compatible with 12V~24V ZVS driver boards. Please configure the appropriate driver circuit according to your actual needs.



Product Safety Information

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.