Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Pricio
1.3 Inch OLED Display Module White/Blue 128X64 SPI/IIC I2C Communicate Color 4Pin/7Pin Screen Board — image 1
Hover to zoom

1 / 8 · Click to enlarge

Pricio

1.3 Inch OLED Display Module White/Blue 128X64 SPI/IIC I2C Communicate Color 4Pin/7Pin Screen Board

5.05 ratings
AI Summary
Display Screen for everyday users

The 1.3 Inch OLED Display Module White/Blue 128X64 SPI/IIC I2C Communicate Color 4Pin/7Pin Screen Board by Pricio is a mid-range display screen designed for everyday users. Customers praise its excellent build quality. 100% of buyers rate it 4★ or above.

excellent build quality
₹2,000
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Price: ₹2,000

Total: ₹2,000
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 4 Aug18 Aug
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Ideal For

Everyday convenience
Share:
SKU: bg-2015769Category: Display Screen

About This Product

The 1.3 Inch OLED Display Module White/Blue 128X64 SPI/IIC I2C Communicate Color 4Pin/7Pin Screen Board by Pricio is a mid-range display screen designed for everyday users. Customers highlight its excellent build quality.

Customer Verdict

100% of buyers rated this product 4 stars or above. The most appreciated qualities are: excellent build quality.

Why Buy from Pricio?

Pricio sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

Specifications:
1. Resolution: 128X64
2. Super wide viewing angle: More than 160 ° (maximum viewing angle display a screen)
3. Ultra-low power consumption: Normal display 0.08W (far below the TFT display)
4. Wide supply range: DC 3V-5V (without any changes, directly compatible with common 3.3V and 5V power supply system)
5. Industrial grade: Operating temperature range -30 degree~ 70 degree
6. The ultra-small size: (length) 35.4MM * (W) 33.5MM * (thickness) 4.3MM
7. Support for multiple operating modes: 3-wire SPI, 4 wire SPI, IIC
8. With chip select CS signal, you can achieve multiple SPI or IIC device on the same bus work
9. Compatible with 3.3V and 5V control chip I / O level (without any set, directly compatible)
10. OLED screen, internal drive chip: SH1106 (Operation and SSD1306 same)


Package Include: 

1x Module Board



Product Safety Information

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.